Add SD Card node for Qualcomm qcm6490-idp Board.

Signed-off-by: Sachin Gupta <quic_sachgupt@quicinc.com>
---
Changes from v2:
 - Corrected patch version.

Changes from v1:
 - Define sd_cd node. (Thanks Dmitry)
---
 arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 33 ++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index a0668f767e4b..95d5cf2d9bcd 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -641,6 +641,21 @@
 	status = "okay";
 };
 
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
 &sdhc_1 {
 	non-removable;
 	no-sd;
@@ -655,12 +670,30 @@
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
+
+	sd_cd: sd-cd-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
 };
 
 &uart5 {
 	status = "okay";
 };
 
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
 &usb_1 {
 	status = "okay";
 };
-- 
2.17.1

Hi Sachin,

Thanks for the patch

On 29/08/2024 13:12, Sachin Gupta wrote:
> Add SD Card node for Qualcomm qcm6490-idp Board.
> 
> Signed-off-by: Sachin Gupta <quic_sachgupt@quicinc.com>
> ---
> Changes from v2:
>   - Corrected patch version.
> 
> Changes from v1:
>   - Define sd_cd node. (Thanks Dmitry)
> ---
>   arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 33 ++++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> index a0668f767e4b..95d5cf2d9bcd 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -641,6 +641,21 @@
>   	status = "okay";
>   };
>   
> +&sdc2_clk {
> +	bias-disable;
> +	drive-strength = <16>;
> +};
> +
> +&sdc2_cmd {
> +	bias-pull-up;
> +	drive-strength = <10>;
> +};
> +
> +&sdc2_data {
> +	bias-pull-up;
> +	drive-strength = <10>;
> +};
> +
>   &sdhc_1 {
>   	non-removable;
>   	no-sd;
> @@ -655,12 +670,30 @@
>   &tlmm {
>   	gpio-reserved-ranges = <32 2>, /* ADSP */
>   			       <48 4>; /* NFC */
> +
> +	sd_cd: sd-cd-state {
> +		pins = "gpio91";
> +		function = "gpio";
> +		bias-pull-up;
> +	};
>   };
>   
>   &uart5 {
>   	status = "okay";
>   };
>   
> +&sdhc_2 {

Alphabetical order please! This should go after sdhc_1

With that fix, please add

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>

Thanks and regards,
> +	status = "okay";
> +
> +	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
> +	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
> +
> +	vmmc-supply = <&vreg_l9c_2p96>;
> +	vqmmc-supply = <&vreg_l6c_2p96>;
> +
> +	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
> +};
> +
>   &usb_1 {
>   	status = "okay";
>   };

-- 
// Caleb (they/them)

On Thu, Aug 29, 2024 at 05:42:25PM GMT, Sachin Gupta wrote:
> Add SD Card node for Qualcomm qcm6490-idp Board.
> 
> Signed-off-by: Sachin Gupta <quic_sachgupt@quicinc.com>
> ---
> Changes from v2:
>  - Corrected patch version.

In future: no need to resend for such small issues.

> 
> Changes from v1:
>  - Define sd_cd node. (Thanks Dmitry)
> ---
>  arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 33 ++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry