drivers/ufs/host/ufs-qcom.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
Add fixup_dev_quirk vops in QCOM UFS platforms and provide an initial
vendor-specific device quirk table to add UFS device specific quirks
which are enabled only for specified UFS devices.
Micron and Skhynix UFS device needs DELAY_BEFORE_LPM quirk to have a
delay before VCC is powered off.
Toshiba UFS devices require delay after VCC power rail is turned-off
in QCOM platforms. Hence add Toshiba vendor ID and DELAY_AFTER_LPM
quirk for Toshiba UFS devices in QCOM platforms.
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
---
drivers/ufs/host/ufs-qcom.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 810e637047d0..9dbfbe643e5e 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -834,6 +834,25 @@ static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
return err;
}
+/* UFS device-specific quirks */
+static struct ufs_dev_quirk ufs_qcom_dev_fixups[] = {
+ { .wmanufacturerid = UFS_VENDOR_MICRON,
+ .model = UFS_ANY_MODEL,
+ .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM },
+ { .wmanufacturerid = UFS_VENDOR_SKHYNIX,
+ .model = UFS_ANY_MODEL,
+ .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM },
+ { .wmanufacturerid = UFS_VENDOR_TOSHIBA,
+ .model = UFS_ANY_MODEL,
+ .quirk = UFS_DEVICE_QUIRK_DELAY_AFTER_LPM },
+ {}
+};
+
+static void ufs_qcom_fixup_dev_quirks(struct ufs_hba *hba)
+{
+ ufshcd_fixup_dev_quirks(hba, ufs_qcom_dev_fixups);
+}
+
static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
{
return ufshci_version(2, 0);
@@ -1798,6 +1817,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
.link_startup_notify = ufs_qcom_link_startup_notify,
.pwr_change_notify = ufs_qcom_pwr_change_notify,
.apply_dev_quirks = ufs_qcom_apply_dev_quirks,
+ .fixup_dev_quirks = ufs_qcom_fixup_dev_quirks,
.suspend = ufs_qcom_suspend,
.resume = ufs_qcom_resume,
.dbg_register_dump = ufs_qcom_dump_dbg_regs,
--
2.17.1
On Wed, Aug 28, 2024 at 07:10:32PM +0530, Manish Pandey wrote:
> Add fixup_dev_quirk vops in QCOM UFS platforms and provide an initial
> vendor-specific device quirk table to add UFS device specific quirks
> which are enabled only for specified UFS devices.
>
Why the quirks are enabled only for Qcom platforms? If these are required by the
UFS device, then they should be added to ufs_fixups[] in ufshcd.c.
> Micron and Skhynix UFS device needs DELAY_BEFORE_LPM quirk to have a
> delay before VCC is powered off.
>
Micron fix is already part of ufs_fixups[].
> Toshiba UFS devices require delay after VCC power rail is turned-off
> in QCOM platforms. Hence add Toshiba vendor ID and DELAY_AFTER_LPM
> quirk for Toshiba UFS devices in QCOM platforms.
>
This sounds like the issue is specific to Qcom platforms only.
> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
> ---
Where is the changelog?
- Mani
> drivers/ufs/host/ufs-qcom.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 810e637047d0..9dbfbe643e5e 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -834,6 +834,25 @@ static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
> return err;
> }
>
> +/* UFS device-specific quirks */
> +static struct ufs_dev_quirk ufs_qcom_dev_fixups[] = {
> + { .wmanufacturerid = UFS_VENDOR_MICRON,
> + .model = UFS_ANY_MODEL,
> + .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM },
> + { .wmanufacturerid = UFS_VENDOR_SKHYNIX,
> + .model = UFS_ANY_MODEL,
> + .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM },
> + { .wmanufacturerid = UFS_VENDOR_TOSHIBA,
> + .model = UFS_ANY_MODEL,
> + .quirk = UFS_DEVICE_QUIRK_DELAY_AFTER_LPM },
> + {}
> +};
> +
> +static void ufs_qcom_fixup_dev_quirks(struct ufs_hba *hba)
> +{
> + ufshcd_fixup_dev_quirks(hba, ufs_qcom_dev_fixups);
> +}
> +
> static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
> {
> return ufshci_version(2, 0);
> @@ -1798,6 +1817,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> .link_startup_notify = ufs_qcom_link_startup_notify,
> .pwr_change_notify = ufs_qcom_pwr_change_notify,
> .apply_dev_quirks = ufs_qcom_apply_dev_quirks,
> + .fixup_dev_quirks = ufs_qcom_fixup_dev_quirks,
> .suspend = ufs_qcom_suspend,
> .resume = ufs_qcom_resume,
> .dbg_register_dump = ufs_qcom_dump_dbg_regs,
> --
> 2.17.1
>
--
மணிவண்ணன் சதாசிவம்
On 8/28/2024 7:38 PM, Manivannan Sadhasivam wrote:
> On Wed, Aug 28, 2024 at 07:10:32PM +0530, Manish Pandey wrote:
>> Add fixup_dev_quirk vops in QCOM UFS platforms and provide an initial
>> vendor-specific device quirk table to add UFS device specific quirks
>> which are enabled only for specified UFS devices.
>>
>
> Why the quirks are enabled only for Qcom platforms? If these are required by the
> UFS device, then they should be added to ufs_fixups[] in ufshcd.c.
>
As of now, we are not sure if the same would be applicable to other
vendors as well, so avoiding to add in ufs_fixups[].
>> Micron and Skhynix UFS device needs DELAY_BEFORE_LPM quirk to have a
>> delay before VCC is powered off.
>>
>
> Micron fix is already part of ufs_fixups[].
Thanks for guidance, will take care in next patch set.
>
>> Toshiba UFS devices require delay after VCC power rail is turned-off
>> in QCOM platforms. Hence add Toshiba vendor ID and DELAY_AFTER_LPM
>> quirk for Toshiba UFS devices in QCOM platforms.
>>
>
> This sounds like the issue is specific to Qcom platforms only.
>
Not sure, if for other vendors it is required. Hence adding for Qcom only.
>> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
>> ---
>
> Where is the changelog?
>
> - Mani
>
>> drivers/ufs/host/ufs-qcom.c | 20 ++++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>> index 810e637047d0..9dbfbe643e5e 100644
>> --- a/drivers/ufs/host/ufs-qcom.c
>> +++ b/drivers/ufs/host/ufs-qcom.c
>> @@ -834,6 +834,25 @@ static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
>> return err;
>> }
>>
>> +/* UFS device-specific quirks */
>> +static struct ufs_dev_quirk ufs_qcom_dev_fixups[] = {
>> + { .wmanufacturerid = UFS_VENDOR_MICRON,
>> + .model = UFS_ANY_MODEL,
>> + .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM },
>> + { .wmanufacturerid = UFS_VENDOR_SKHYNIX,
>> + .model = UFS_ANY_MODEL,
>> + .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM },
>> + { .wmanufacturerid = UFS_VENDOR_TOSHIBA,
>> + .model = UFS_ANY_MODEL,
>> + .quirk = UFS_DEVICE_QUIRK_DELAY_AFTER_LPM },
>> + {}
>> +};
>> +
>> +static void ufs_qcom_fixup_dev_quirks(struct ufs_hba *hba)
>> +{
>> + ufshcd_fixup_dev_quirks(hba, ufs_qcom_dev_fixups);
>> +}
>> +
>> static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
>> {
>> return ufshci_version(2, 0);
>> @@ -1798,6 +1817,7 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
>> .link_startup_notify = ufs_qcom_link_startup_notify,
>> .pwr_change_notify = ufs_qcom_pwr_change_notify,
>> .apply_dev_quirks = ufs_qcom_apply_dev_quirks,
>> + .fixup_dev_quirks = ufs_qcom_fixup_dev_quirks,
>> .suspend = ufs_qcom_suspend,
>> .resume = ufs_qcom_resume,
>> .dbg_register_dump = ufs_qcom_dump_dbg_regs,
>> --
>> 2.17.1
>>
>
© 2016 - 2025 Red Hat, Inc.