The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
---
 drivers/net/ethernet/renesas/ravb_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 471a68b0146e..b103632de4d4 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -555,8 +555,10 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
 
 static void ravb_emac_init_rcar(struct net_device *ndev)
 {
+	struct ravb_private *priv = netdev_priv(ndev);
+
 	/* Receive frame limit set register */
-	ravb_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, RFLR);
+	ravb_write(ndev, priv->info->rx_max_frame_size + ETH_FCS_LEN, RFLR);
 
 	/* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */
 	ravb_write(ndev, ECMR_ZPF | ECMR_DM |
-- 
2.43.0

Hi Paul,

Thanks for your work.

On 2024-08-28 11:22:26 +0100, Paul Barker wrote:
> The RX frame size limit should not be based on the current MTU setting.
> Instead it should be based on the hardware capabilities.
> 
> Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
> Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/net/ethernet/renesas/ravb_main.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index 471a68b0146e..b103632de4d4 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -555,8 +555,10 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
>  
>  static void ravb_emac_init_rcar(struct net_device *ndev)
>  {
> +	struct ravb_private *priv = netdev_priv(ndev);
> +
>  	/* Receive frame limit set register */

I wonder if we also should expand this comment to explain the addition 
of ETH_FCS_LEN, I have to look this up every time :-) How would you feel 
about adding something like?

    /* Set receive frame length
     *
     * The length set here described the frame from the destination 
     * address up to and including the CRC data. However only the frame 
     * data, exuding the CRC, are transferred to memory. To allow for 
     * the largest frames add the CRC length to the maximum Rx 
     * descriptor size.
     */

> -	ravb_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, RFLR);
> +	ravb_write(ndev, priv->info->rx_max_frame_size + ETH_FCS_LEN, RFLR);
>  
>  	/* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */
>  	ravb_write(ndev, ECMR_ZPF | ECMR_DM |
> -- 
> 2.43.0
> 

-- 
Kind Regards,
Niklas Söderlund