From: Nitheesh Sekar <quic_nsekar@quicinc.com>

Enable the PCIe controller and PHY nodes for RDP 432-c2.

Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
---
 [v2] Moved status as last property

 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index 8460b538eb6a..2b253da7f776 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -28,6 +28,15 @@ &blsp1_uart1 {
 	status = "okay";
 };
 
+&pcie1 {
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_x2phy {
+	status = "okay";
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
-- 
2.34.1

On Tue, Aug 27, 2024 at 10:27:57AM GMT, Sricharan R wrote:
> From: Nitheesh Sekar <quic_nsekar@quicinc.com>
> 
> Enable the PCIe controller and PHY nodes for RDP 432-c2.
> 
> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  [v2] Moved status as last property
> 
>  arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
> index 8460b538eb6a..2b253da7f776 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
> @@ -28,6 +28,15 @@ &blsp1_uart1 {
>  	status = "okay";
>  };
>  
> +&pcie1 {
> +	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;

pinctrl? wake-gpios?

> +	status = "okay";
> +};
> +
> +&pcie_x2phy {
> +	status = "okay";
> +};
> +
>  &sdhc_1 {
>  	pinctrl-0 = <&sdc_default_state>;
>  	pinctrl-names = "default";
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

On 8/29/2024 2:40 PM, Dmitry Baryshkov wrote:
> On Tue, Aug 27, 2024 at 10:27:57AM GMT, Sricharan R wrote:
>> From: Nitheesh Sekar <quic_nsekar@quicinc.com>
>>
>> Enable the PCIe controller and PHY nodes for RDP 432-c2.
>>
>> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>>   [v2] Moved status as last property
>>
>>   arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
>> index 8460b538eb6a..2b253da7f776 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
>> @@ -28,6 +28,15 @@ &blsp1_uart1 {
>>   	status = "okay";
>>   };
>>   
>> +&pcie1 {
>> +	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
> 
> pinctrl? wake-gpios?
> 

  ok, will add to make it explicit.
  Otherwise pinctrl was default muxed.

Regards,
  Sricharan