From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

This patch series adds the relevant phy and controller
DT configurations for enabling PCI gen2 support
on IPQ5018.

v2:
  Fixed all review comments from Krzysztof, Robert Marko,
  Dmitry Baryshkov, Manivannan Sadhasivam, Konrad Dybcio.
  Updated the respective patches for their changes.

v1:
 https://lore.kernel.org/lkml/32389b66-48f3-8ee8-e2f1-1613feed3cc7@gmail.com/T/

Nitheesh Sekar (5):
  dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  dt-bindings: PCI: qcom: Add IPQ5108 SoC
  phy: qcom: Introduce PCIe UNIPHY 28LP driver
  arm64: dts: qcom: ipq5018: Add PCIe related nodes
  arm64: dts: qcom: ipq5018: Enable PCIe

Sricharan R (1):
  PCI: qcom: Add support for IPQ5018

 .../devicetree/bindings/pci/qcom,pcie.yaml    |  35 ++
 .../phy/qcom,ipq5018-uniphy-pcie.yaml         |  70 ++++
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts |   9 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 166 ++++++++-
 drivers/pci/controller/dwc/pcie-qcom.c        |   1 +
 drivers/phy/qualcomm/Kconfig                  |  12 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c  | 341 ++++++++++++++++++
 8 files changed, 633 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5018-uniphy-pcie.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c

-- 
2.34.1

On Tue, Aug 27, 2024 at 10:27:51AM +0530, Sricharan R wrote:
> From: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> 
> This patch series adds the relevant phy and controller
> DT configurations for enabling PCI gen2 support
> on IPQ5018.
> 
> v2:
>   Fixed all review comments from Krzysztof, Robert Marko,
>   Dmitry Baryshkov, Manivannan Sadhasivam, Konrad Dybcio.

That's not specific. What exactly did you do? You must list the
changes.

Best regards,
Krzysztof