From: Francesco Dolcini <francesco.dolcini@toradex.com>

This series improves Toradex Apalis iMX8Q support adding:
 - correct thermal zones
 - analogue audio
 - USB Host (Apalis USBH4 interface)

In addition to these it also removes the adma_pwm from the i.MX8QM SoC dtsi, as
this IP is not available on this specific SoC.

Andrejs Cainikovs (2):
  arm: dts: imx8qm: Remove adma pwm
  arm64: dts: imx8-apalis: Set thermal thresholds

Hiago De Franco (1):
  arm64: dts: imx8-apalis: Add nau8822 audio-codec to apalis eval v1.2

João Paulo Gonçalves (2):
  arm64: dts: imx8-apalis: Add audio support
  arm64: dts: imx8-apalis: Add usb4 host support

 .../dts/freescale/imx8-apalis-eval-v1.2.dtsi  |  69 +++++++++
 .../boot/dts/freescale/imx8-apalis-eval.dtsi  |  31 +++-
 .../dts/freescale/imx8-apalis-ixora-v1.1.dtsi |  31 +++-
 .../dts/freescale/imx8-apalis-ixora-v1.2.dtsi |  31 +++-
 .../boot/dts/freescale/imx8-apalis-v1.1.dtsi  | 133 ++++++++++++++++--
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |   3 +
 6 files changed, 272 insertions(+), 26 deletions(-)

-- 
2.39.2

Hello Shawn,

On Tue, Aug 27, 2024 at 12:15:36AM +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> This series improves Toradex Apalis iMX8Q support adding:
>  - correct thermal zones
>  - analogue audio
>  - USB Host (Apalis USBH4 interface)
> 
> In addition to these it also removes the adma_pwm from the i.MX8QM SoC dtsi, as
> this IP is not available on this specific SoC.
> 

FYI, I just sent a v2 of this series to correctly sort the I2C nodes,
this is the same change you requested a few days ago on colibri-imx8x.

Francesco