CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz.
But now PLL0 rate is 1GHz and the cpu frequency loads become
250/333/500/1000MHz in fact.
The PLL0 rate should be default set to 1.5GHz and set the
cpu_core rate to 500MHz in safe.
Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC")
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index ca2d44d59d48..c7771b3b6475 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -365,6 +365,12 @@ spi_dev0: spi@0 {
};
};
+&syscrg {
+ assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
+ <&pllclk JH7110_PLLCLK_PLL0_OUT>;
+ assigned-clock-rates = <500000000>, <1500000000>;
+};
+
&sysgpio {
i2c0_pins: i2c0-0 {
i2c-pins {
--
2.34.1