Adds support for Advanced Configuration and Power Interface (ACPI) within
the Rockchip GPIO driver.

Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
---
 drivers/gpio/gpio-rockchip.c | 160 +++++++++++++++++++++++------------
 1 file changed, 105 insertions(+), 55 deletions(-)

diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index 4f8d50626fcc..9e4a8cd94c66 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -6,6 +6,7 @@
  * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
  */
 
+#include <linux/acpi.h>
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/device.h>
@@ -17,10 +18,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 
 #include "../pinctrl/core.h"
@@ -210,6 +213,7 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc,
 		freq = clk_get_rate(bank->db_clk);
 		if (!freq)
 			return -EINVAL;
+
 		div = (u64)(GENMASK(23, 0) + 1) * 1000000;
 		if (bank->gpio_type == GPIO_TYPE_V2)
 			max_debounce = DIV_ROUND_CLOSEST_ULL(div, freq);
@@ -515,7 +519,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank)
 	struct irq_chip_generic *gc;
 	int ret;
 
-	bank->domain = irq_domain_add_linear(bank->of_node, 32,
+	bank->domain = irq_domain_create_linear(dev_fwnode(bank->dev), 32,
 					&irq_generic_chip_ops, NULL);
 	if (!bank->domain) {
 		dev_warn(bank->dev, "could not init irq domain for bank %s\n",
@@ -637,25 +641,9 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
 	return ret;
 }
 
-static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
+static void rockchip_gpio_get_ver(struct rockchip_pin_bank *bank)
 {
-	struct resource res;
-	int id = 0;
-
-	if (of_address_to_resource(bank->of_node, 0, &res)) {
-		dev_err(bank->dev, "cannot find IO resource for bank\n");
-		return -ENOENT;
-	}
-
-	bank->reg_base = devm_ioremap_resource(bank->dev, &res);
-	if (IS_ERR(bank->reg_base))
-		return PTR_ERR(bank->reg_base);
-
-	bank->irq = irq_of_parse_and_map(bank->of_node, 0);
-	if (!bank->irq)
-		return -EINVAL;
-
-	id = readl(bank->reg_base + gpio_regs_v2.version_id);
+	int id = readl(bank->reg_base + gpio_regs_v2.version_id);
 
 	switch (id) {
 	case GPIO_TYPE_V2:
@@ -672,8 +660,6 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
 		bank->gpio_type = GPIO_TYPE_V1;
 		pr_info("Note: Use default GPIO_TYPE_V1!\n");
 	}
-
-	return 0;
 }
 
 static struct rockchip_pin_bank *
@@ -695,61 +681,120 @@ rockchip_gpio_find_bank(struct pinctrl_dev *pctldev, int id)
 	return found ? bank : NULL;
 }
 
+static int rockchip_gpio_of_get_bank_id(struct device *dev)
+{
+	static int gpio;
+	int bank_id = -1;
+
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+		bank_id = of_alias_get_id(dev->of_node, "gpio");
+		if (bank_id < 0)
+			bank_id = gpio++;
+	}
+
+	return bank_id;
+}
+
+#ifdef CONFIG_ACPI
+static int rockchip_gpio_acpi_get_bank_id(struct device *dev)
+{
+	struct acpi_device *adev;
+	unsigned long bank_id = -1;
+	const char *uid;
+	int ret;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENXIO;
+
+	uid = acpi_device_uid(adev);
+	if (!uid || !(*uid)) {
+		dev_err(dev, "Cannot retrieve UID\n");
+		return -ENODEV;
+	}
+
+	ret = kstrtoul(uid, 0, &bank_id);
+
+	return !ret ? bank_id : -ERANGE;
+}
+#else
+static int rockchip_gpio_acpi_get_bank_id(struct device *dev)
+{
+	return -ENOENT;
+}
+#endif /* CONFIG_ACPI */
+
 static int rockchip_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	struct device_node *pctlnp = of_get_parent(np);
 	struct pinctrl_dev *pctldev = NULL;
 	struct rockchip_pin_bank *bank = NULL;
-	struct rockchip_pin_deferred *cfg;
-	static int gpio;
-	int id, ret;
+	int bank_id = 0;
+	int ret;
 
-	if (!np || !pctlnp)
-		return -ENODEV;
+	bank_id = rockchip_gpio_acpi_get_bank_id(dev);
+	if (bank_id < 0) {
+		bank_id = rockchip_gpio_of_get_bank_id(dev);
+		if (bank_id < 0)
+			return bank_id;
+	}
 
-	pctldev = of_pinctrl_get(pctlnp);
-	of_node_put(pctlnp);
-	if (!pctldev)
-		return -EPROBE_DEFER;
+	if (!ACPI_COMPANION(dev)) {
+		struct device_node *pctlnp = of_get_parent(dev->of_node);
 
-	id = of_alias_get_id(np, "gpio");
-	if (id < 0)
-		id = gpio++;
+		pctldev = of_pinctrl_get(pctlnp);
+		of_node_put(pctlnp);
+		if (!pctldev)
+			return -EPROBE_DEFER;
 
-	bank = rockchip_gpio_find_bank(pctldev, id);
-	if (!bank)
-		return -EINVAL;
+		bank = rockchip_gpio_find_bank(pctldev, bank_id);
+		if (!bank)
+			return -ENODEV;
+	}
 
+	if (!bank) {
+		bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
+		if (!bank)
+			return -ENOMEM;
+	}
+
+	bank->bank_num = bank_id;
 	bank->dev = dev;
-	bank->of_node = np;
+	bank->of_node = dev->of_node;
+
+	bank->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(bank->reg_base))
+		return PTR_ERR(bank->reg_base);
+
+	bank->irq = platform_get_irq(pdev, 0);
+	if (bank->irq < 0)
+		return bank->irq;
 
 	raw_spin_lock_init(&bank->slock);
 
-	bank->clk = devm_clk_get(dev, "bus");
-	if (IS_ERR(bank->clk)) {
-		bank->clk = of_clk_get(dev->of_node, 0);
+	if (!ACPI_COMPANION(dev)) {
+		bank->clk = devm_clk_get(dev, "bus");
 		if (IS_ERR(bank->clk)) {
-			dev_err(dev, "fail to get apb clock\n");
-			return PTR_ERR(bank->clk);
+			bank->clk = of_clk_get(dev->of_node, 0);
+			if (IS_ERR(bank->clk)) {
+				dev_err(dev, "fail to get apb clock\n");
+				return PTR_ERR(bank->clk);
+			}
 		}
-	}
 
-	ret = rockchip_get_bank_data(bank);
-	if (ret)
-		return ret;
-
-	bank->db_clk = devm_clk_get(dev, "db");
-	if (IS_ERR(bank->db_clk)) {
-		bank->db_clk = of_clk_get(dev->of_node, 1);
-		if (IS_ERR(bank->db_clk))
-			bank->db_clk = NULL;
+		bank->db_clk = devm_clk_get(dev, "db");
+		if (IS_ERR(bank->db_clk)) {
+			bank->db_clk = of_clk_get(dev->of_node, 1);
+			if (IS_ERR(bank->db_clk))
+				bank->db_clk = NULL;
+		}
 	}
 
 	clk_prepare_enable(bank->clk);
 	clk_prepare_enable(bank->db_clk);
 
+	rockchip_gpio_get_ver(bank);
+
 	/*
 	 * Prevent clashes with a deferred output setting
 	 * being added right at this moment.
@@ -763,8 +808,13 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
 	}
 
 	while (!list_empty(&bank->deferred_pins)) {
+		struct rockchip_pin_deferred *cfg;
+
 		cfg = list_first_entry(&bank->deferred_pins,
 				       struct rockchip_pin_deferred, head);
+		if (!cfg)
+			break;
+
 		list_del(&cfg->head);
 
 		switch (cfg->param) {
@@ -789,7 +839,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
 	mutex_unlock(&bank->deferred_lock);
 
 	platform_set_drvdata(pdev, bank);
-	dev_info(dev, "probed %pOF\n", np);
+	dev_info(dev, "probed %pfw\n", dev_fwnode(dev));
 
 	return 0;
 err_unlock:
-- 
2.34.1

Hi,

On Fri, Aug 23, 2024 at 11:43:13AM +0800, Ye Zhang wrote:
> Adds support for Advanced Configuration and Power Interface (ACPI) within
> the Rockchip GPIO driver.
> 
> Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
> ---
>  drivers/gpio/gpio-rockchip.c | 160 +++++++++++++++++++++++------------
>  1 file changed, 105 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
> index 4f8d50626fcc..9e4a8cd94c66 100644
> --- a/drivers/gpio/gpio-rockchip.c
> +++ b/drivers/gpio/gpio-rockchip.c
> @@ -6,6 +6,7 @@
>   * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/bitops.h>
>  #include <linux/clk.h>
>  #include <linux/device.h>
> @@ -17,10 +18,12 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> +#include <linux/of_device.h>

Why this is needed for ACPI support?

>  #include <linux/of_irq.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/pinctrl/pinconf-generic.h>
>  #include <linux/platform_device.h>
> +#include <linux/property.h>
>  #include <linux/regmap.h>
>  
>  #include "../pinctrl/core.h"
> @@ -210,6 +213,7 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc,
>  		freq = clk_get_rate(bank->db_clk);
>  		if (!freq)
>  			return -EINVAL;
> +

Unrelated whitespace change.

>  		div = (u64)(GENMASK(23, 0) + 1) * 1000000;
>  		if (bank->gpio_type == GPIO_TYPE_V2)
>  			max_debounce = DIV_ROUND_CLOSEST_ULL(div, freq);
> @@ -515,7 +519,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank)
>  	struct irq_chip_generic *gc;
>  	int ret;
>  
> -	bank->domain = irq_domain_add_linear(bank->of_node, 32,
> +	bank->domain = irq_domain_create_linear(dev_fwnode(bank->dev), 32,
>  					&irq_generic_chip_ops, NULL);

I wonder if it would be simpler to first convert the driver to use
fwnodes and then in a separate patch, add the ACPI glue?

>  	if (!bank->domain) {
>  		dev_warn(bank->dev, "could not init irq domain for bank %s\n",
> @@ -637,25 +641,9 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
>  	return ret;
>  }
>  
> -static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
> +static void rockchip_gpio_get_ver(struct rockchip_pin_bank *bank)
>  {
> -	struct resource res;
> -	int id = 0;
> -
> -	if (of_address_to_resource(bank->of_node, 0, &res)) {
> -		dev_err(bank->dev, "cannot find IO resource for bank\n");
> -		return -ENOENT;
> -	}
> -
> -	bank->reg_base = devm_ioremap_resource(bank->dev, &res);
> -	if (IS_ERR(bank->reg_base))
> -		return PTR_ERR(bank->reg_base);
> -
> -	bank->irq = irq_of_parse_and_map(bank->of_node, 0);
> -	if (!bank->irq)
> -		return -EINVAL;
> -
> -	id = readl(bank->reg_base + gpio_regs_v2.version_id);
> +	int id = readl(bank->reg_base + gpio_regs_v2.version_id);
>  
>  	switch (id) {
>  	case GPIO_TYPE_V2:
> @@ -672,8 +660,6 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
>  		bank->gpio_type = GPIO_TYPE_V1;
>  		pr_info("Note: Use default GPIO_TYPE_V1!\n");
>  	}
> -
> -	return 0;
>  }
>  
>  static struct rockchip_pin_bank *
> @@ -695,61 +681,120 @@ rockchip_gpio_find_bank(struct pinctrl_dev *pctldev, int id)
>  	return found ? bank : NULL;
>  }
>  
> +static int rockchip_gpio_of_get_bank_id(struct device *dev)
> +{
> +	static int gpio;
> +	int bank_id = -1;

Instead of this -1 probably good to use something like -ENODEV or so.

Also suggest doing the analogous to ACPI way here so that you have the
stub function when CONFIG_OF is not set. This makes it bit more
consistent IMO.

> +
> +	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
> +		bank_id = of_alias_get_id(dev->of_node, "gpio");
> +		if (bank_id < 0)
> +			bank_id = gpio++;
> +	}
> +
> +	return bank_id;
> +}
> +
> +#ifdef CONFIG_ACPI
> +static int rockchip_gpio_acpi_get_bank_id(struct device *dev)
> +{
> +	struct acpi_device *adev;
> +	unsigned long bank_id = -1;

Ditto here regarding -1, also this does not need to be initialized at
all here.

> +	const char *uid;
> +	int ret;
> +
> +	adev = ACPI_COMPANION(dev);
> +	if (!adev)
> +		return -ENXIO;

Or -ENODEV? And is this even possible?

> +
> +	uid = acpi_device_uid(adev);
> +	if (!uid || !(*uid)) {

There are bunch of helpers for this such as acpi_dev_hid_uid_match() and
the like. Not sure if you can use them here but wanted to mention. We
use these in Intel driver for example in intel_pinctrl_get_soc_data() in
case you want to check an example.

Also the !(*uid) looks horrible. Can it be empty string?

> +		dev_err(dev, "Cannot retrieve UID\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = kstrtoul(uid, 0, &bank_id);
> +
> +	return !ret ? bank_id : -ERANGE;
> +}
> +#else
> +static int rockchip_gpio_acpi_get_bank_id(struct device *dev)
> +{
> +	return -ENOENT;
> +}
> +#endif /* CONFIG_ACPI */
> +
>  static int rockchip_gpio_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> -	struct device_node *np = dev->of_node;
> -	struct device_node *pctlnp = of_get_parent(np);
>  	struct pinctrl_dev *pctldev = NULL;
>  	struct rockchip_pin_bank *bank = NULL;
> -	struct rockchip_pin_deferred *cfg;
> -	static int gpio;
> -	int id, ret;
> +	int bank_id = 0;
> +	int ret;
>  
> -	if (!np || !pctlnp)
> -		return -ENODEV;
> +	bank_id = rockchip_gpio_acpi_get_bank_id(dev);
> +	if (bank_id < 0) {
> +		bank_id = rockchip_gpio_of_get_bank_id(dev);
> +		if (bank_id < 0)
> +			return bank_id;

So here with your of_ function you would get -1 which is -EPERM so which
is probably not what you want.

> +	}
>  
> -	pctldev = of_pinctrl_get(pctlnp);
> -	of_node_put(pctlnp);
> -	if (!pctldev)
> -		return -EPROBE_DEFER;
> +	if (!ACPI_COMPANION(dev)) {
> +		struct device_node *pctlnp = of_get_parent(dev->of_node);

Should it check instead that it has the dev->of_node and not assume that
if it does not have ACPI compantion device it is then enumerated from DT?

> -	id = of_alias_get_id(np, "gpio");
> -	if (id < 0)
> -		id = gpio++;
> +		pctldev = of_pinctrl_get(pctlnp);
> +		of_node_put(pctlnp);
> +		if (!pctldev)
> +			return -EPROBE_DEFER;
>  
> -	bank = rockchip_gpio_find_bank(pctldev, id);
> -	if (!bank)
> -		return -EINVAL;
> +		bank = rockchip_gpio_find_bank(pctldev, bank_id);
> +		if (!bank)
> +			return -ENODEV;
> +	}
>  
> +	if (!bank) {
> +		bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
> +		if (!bank)
> +			return -ENOMEM;
> +	}
> +
> +	bank->bank_num = bank_id;
>  	bank->dev = dev;
> -	bank->of_node = np;
> +	bank->of_node = dev->of_node;
> +
> +	bank->reg_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(bank->reg_base))
> +		return PTR_ERR(bank->reg_base);
> +
> +	bank->irq = platform_get_irq(pdev, 0);
> +	if (bank->irq < 0)
> +		return bank->irq;
>  
>  	raw_spin_lock_init(&bank->slock);
>  
> -	bank->clk = devm_clk_get(dev, "bus");
> -	if (IS_ERR(bank->clk)) {
> -		bank->clk = of_clk_get(dev->of_node, 0);
> +	if (!ACPI_COMPANION(dev)) {

Ditto here.

Also maybe it needs to have separate probe paths for ACPI and DT because
this makes it look kind of confusing.

> +		bank->clk = devm_clk_get(dev, "bus");
>  		if (IS_ERR(bank->clk)) {
> -			dev_err(dev, "fail to get apb clock\n");
> -			return PTR_ERR(bank->clk);
> +			bank->clk = of_clk_get(dev->of_node, 0);
> +			if (IS_ERR(bank->clk)) {
> +				dev_err(dev, "fail to get apb clock\n");
> +				return PTR_ERR(bank->clk);
> +			}
>  		}
> -	}
>  
> -	ret = rockchip_get_bank_data(bank);
> -	if (ret)
> -		return ret;
> -
> -	bank->db_clk = devm_clk_get(dev, "db");
> -	if (IS_ERR(bank->db_clk)) {
> -		bank->db_clk = of_clk_get(dev->of_node, 1);
> -		if (IS_ERR(bank->db_clk))
> -			bank->db_clk = NULL;
> +		bank->db_clk = devm_clk_get(dev, "db");
> +		if (IS_ERR(bank->db_clk)) {
> +			bank->db_clk = of_clk_get(dev->of_node, 1);
> +			if (IS_ERR(bank->db_clk))
> +				bank->db_clk = NULL;
> +		}
>  	}
>  
>  	clk_prepare_enable(bank->clk);
>  	clk_prepare_enable(bank->db_clk);
>  
> +	rockchip_gpio_get_ver(bank);
> +
>  	/*
>  	 * Prevent clashes with a deferred output setting
>  	 * being added right at this moment.
> @@ -763,8 +808,13 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
>  	}
>  
>  	while (!list_empty(&bank->deferred_pins)) {
> +		struct rockchip_pin_deferred *cfg;
> +
>  		cfg = list_first_entry(&bank->deferred_pins,
>  				       struct rockchip_pin_deferred, head);
> +		if (!cfg)
> +			break;
> +

These changes look unrelated?

>  		list_del(&cfg->head);
>  
>  		switch (cfg->param) {
> @@ -789,7 +839,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
>  	mutex_unlock(&bank->deferred_lock);
>  
>  	platform_set_drvdata(pdev, bank);
> -	dev_info(dev, "probed %pOF\n", np);
> +	dev_info(dev, "probed %pfw\n", dev_fwnode(dev));

Is this really useful inro for user to see?

>  
>  	return 0;
>  err_unlock:
> -- 
> 2.34.1