The AMD HCI controller currently only supports PIO mode but exposes DMA
rings to the OS, which leads to the controller being configured in DMA
mode. To address this, add a quirk to avoid configuring the controller in
DMA mode and default to PIO mode.

Additionally, introduce a generic quirk infrastructure to the mipi-i3c-hci
driver to facilitate seamless future quirk additions.

Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
 drivers/i3c/master/mipi-i3c-hci/core.c | 9 ++++++++-
 drivers/i3c/master/mipi-i3c-hci/hci.h  | 1 +
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index d1952a5619d4..3aa4aa9deb56 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -754,6 +754,11 @@ static int i3c_hci_init(struct i3c_hci *hci)
 		return -EINVAL;
 	}
 
+	/* Quirk for HCI_QUIRK_PIO_MODE on AMD platforms */
+	regval = reg_read(HCI_VERSION);
+	if (hci->quirks & HCI_QUIRK_PIO_MODE)
+		hci->RHS_regs = NULL;
+
 	/* Try activating DMA operations first */
 	if (hci->RHS_regs) {
 		reg_clear(HC_CONTROL, HC_CONTROL_PIO_MODE);
@@ -804,6 +809,8 @@ static int i3c_hci_probe(struct platform_device *pdev)
 	/* temporary for dev_printk's, to be replaced in i3c_master_register */
 	hci->master.dev.init_name = dev_name(&pdev->dev);
 
+	hci->quirks = (unsigned long)device_get_match_data(&pdev->dev);
+
 	ret = i3c_hci_init(hci);
 	if (ret)
 		return ret;
@@ -836,7 +843,7 @@ static const __maybe_unused struct of_device_id i3c_hci_of_match[] = {
 MODULE_DEVICE_TABLE(of, i3c_hci_of_match);
 
 static const struct acpi_device_id i3c_hci_acpi_match[] = {
-	{"AMDI5017"},
+	{"AMDI5017", HCI_QUIRK_PIO_MODE},
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, i3c_hci_acpi_match);
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index f94d95e024be..c56b838fb431 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -135,6 +135,7 @@ struct i3c_hci_dev_data {
 
 /* list of quirks */
 #define HCI_QUIRK_RAW_CCC	BIT(1)	/* CCC framing must be explicit */
+#define HCI_QUIRK_PIO_MODE	BIT(2)  /* Set PIO mode for AMD platforms */
 
 
 /* global functions */
-- 
2.25.1

On 8/21/24 4:35 PM, Shyam Sundar S K wrote:
> The AMD HCI controller currently only supports PIO mode but exposes DMA
> rings to the OS, which leads to the controller being configured in DMA
> mode. To address this, add a quirk to avoid configuring the controller in
> DMA mode and default to PIO mode.
> 
> Additionally, introduce a generic quirk infrastructure to the mipi-i3c-hci
> driver to facilitate seamless future quirk additions.
> 
> Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
> Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
> Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
> Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
>   drivers/i3c/master/mipi-i3c-hci/core.c | 9 ++++++++-
>   drivers/i3c/master/mipi-i3c-hci/hci.h  | 1 +
>   2 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> index d1952a5619d4..3aa4aa9deb56 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> @@ -754,6 +754,11 @@ static int i3c_hci_init(struct i3c_hci *hci)
>   		return -EINVAL;
>   	}
>   
> +	/* Quirk for HCI_QUIRK_PIO_MODE on AMD platforms */
> +	regval = reg_read(HCI_VERSION);
> +	if (hci->quirks & HCI_QUIRK_PIO_MODE)
> +		hci->RHS_regs = NULL;
> +
>   	/* Try activating DMA operations first */
>   	if (hci->RHS_regs) {
>   		reg_clear(HC_CONTROL, HC_CONTROL_PIO_MODE);

This looks otherwise ok to me but with "regval = reg_read(HCI_VERSION);" 
removed. I commented that in the patch 2/6.