From: Yashwanth Varakala <y.varakala@phytec.de>

Add VCC_5V_SW regulator reference to the usb1 phy node to reflect the
schematic. This also silences the fallback dummy regulator warning.

Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 62f1819bc1a4..6e81870e177c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -260,6 +260,7 @@ &usb_dwc3_0 {
 
 /* USB2 4-port USB3.0 HUB */
 &usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v_sw>;
 	status = "okay";
 };
 

-- 
2.25.1

On Wed, 2024-08-14 at 11:26 +0200, Teresa Remmet wrote:
> From: Yashwanth Varakala <y.varakala@phytec.de>
> 
> Add VCC_5V_SW regulator reference to the usb1 phy node to reflect the
> schematic. This also silences the fallback dummy regulator warning.
> 
> Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> index 62f1819bc1a4..6e81870e177c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> @@ -260,6 +260,7 @@ &usb_dwc3_0 {
>  
>  /* USB2 4-port USB3.0 HUB */
>  &usb3_phy1 {
> +	vbus-supply = <&reg_vcc_5v_sw>;
>  	status = "okay";
>  };
>  
>