From: Baojun Xu <baojun.xu@ti.com>

Wrong calibration data order cause sound too low in some device.
Fix wrong calibrated data order, add calibration data converssion
by get_unaligned_be32() after reading from UEFI.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>

---
v2:
 - Change data type from int to __be32.
v1:
 - Change copyright date, and add new maintainer.
 - Add unaligned.h included for get_unaligned_be32().
 - In tas2781_apply_calib(), change data address transfer directly to
   get data by get_unaligned_be32(), and send address to device.
---
 sound/pci/hda/tas2781_hda_i2c.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 8a7fe48043d2..5a8193285f9f 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -2,10 +2,12 @@
 //
 // TAS2781 HDA I2C driver
 //
-// Copyright 2023 Texas Instruments, Inc.
+// Copyright 2023 - 2024 Texas Instruments, Inc.
 //
 // Author: Shenghao Ding <shenghao-ding@ti.com>
+// Current maintainer: Baojun Xu <baojun.xu@ti.com>
 
+#include <asm/unaligned.h>
 #include <linux/acpi.h>
 #include <linux/crc8.h>
 #include <linux/crc32.h>
@@ -519,20 +521,22 @@ static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
 	static const unsigned char rgno_array[CALIB_MAX] = {
 		0x74, 0x0c, 0x14, 0x70, 0x7c,
 	};
-	unsigned char *data;
+	int offset = 0;
 	int i, j, rc;
+	__be32 data;
 
 	for (i = 0; i < tas_priv->ndev; i++) {
-		data = tas_priv->cali_data.data +
-			i * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
 		for (j = 0; j < CALIB_MAX; j++) {
+			data = get_unaligned_be32(
+				&tas_priv->cali_data.data[offset]);
 			rc = tasdevice_dev_bulk_write(tas_priv, i,
 				TASDEVICE_REG(0, page_array[j], rgno_array[j]),
-				&(data[4 * j]), 4);
+				(unsigned char *)&data, 4);
 			if (rc < 0)
 				dev_err(tas_priv->dev,
 					"chn %d calib %d bulk_wr err = %d\n",
 					i, j, rc);
+			offset += 4;
 		}
 	}
 }
-- 
2.43.0

On Tue, Aug 13, 2024 at 12:37:48PM +0800, Shenghao Ding wrote:
> From: Baojun Xu <baojun.xu@ti.com>
> 
> Wrong calibration data order cause sound too low in some device.
> Fix wrong calibrated data order, add calibration data converssion
> by get_unaligned_be32() after reading from UEFI.

...

>  			rc = tasdevice_dev_bulk_write(tas_priv, i,
>  				TASDEVICE_REG(0, page_array[j], rgno_array[j]),
> -				&(data[4 * j]), 4);
> +				(unsigned char *)&data, 4);

Casting is not needed if the helper is written in a way how regmap IO accessors
done.

In any case, 4 is sizeof(data)

> +			offset += 4;

Ditto.

-- 
With Best Regards,
Andy Shevchenko

On Tue, 13 Aug 2024 06:37:48 +0200,
Shenghao Ding wrote:
> 
> From: Baojun Xu <baojun.xu@ti.com>
> 
> Wrong calibration data order cause sound too low in some device.
> Fix wrong calibrated data order, add calibration data converssion
> by get_unaligned_be32() after reading from UEFI.
> 
> Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
> Signed-off-by: Baojun Xu <baojun.xu@ti.com>

Applied to for-linus branch now.
I corrected the subject prefix, as this is clearly no ASoC change.


thanks,

Takashi