Drop the RCPM consumer example from the binding (LPUART device node),
because:
1. Using phandles is typical syntax, thus explaining it is not needed in
   the provider binding,
2. It has 'fsl,rcpm-wakeup' property which is not allowed by LPUART
   binding so it causes dt_binding_check warning:

   fsl,rcpm.example.dtb: serial@2950000: Unevaluated properties are not allowed ('fsl,rcpm-wakeup' was unexpected)
     from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#

Alternatively, this property could be added to LPUART binding
(fsl-lpuart.yaml), but it looks like none of in-tree DTS use it.

Fixes: ad21e3840a88 ("dt-bindings: soc: fsl: Convert rcpm to yaml format")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/soc/fsl/fsl,rcpm.yaml         | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
index a7db0aad2b25..03d71ab930d7 100644
--- a/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
@@ -80,17 +80,8 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    rcpm: global-utilities@e2000 {
+    global-utilities@e2000 {
           compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
           reg = <0xe2000 0x1000>;
           #fsl,rcpm-wakeup-cells = <2>;
     };
-
-    serial@2950000 {
-         compatible = "fsl,ls1021a-lpuart";
-         reg = <0x2950000 0x1000>;
-         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-         clocks = <&sysclk>;
-         clock-names = "ipg";
-         fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
-    };
-- 
2.43.0

On Sun, 11 Aug 2024 17:35:07 +0200, Krzysztof Kozlowski wrote:
> Drop the RCPM consumer example from the binding (LPUART device node),
> because:
> 1. Using phandles is typical syntax, thus explaining it is not needed in
>    the provider binding,
> 2. It has 'fsl,rcpm-wakeup' property which is not allowed by LPUART
>    binding so it causes dt_binding_check warning:
> 
>    fsl,rcpm.example.dtb: serial@2950000: Unevaluated properties are not allowed ('fsl,rcpm-wakeup' was unexpected)
>      from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
> 
> Alternatively, this property could be added to LPUART binding
> (fsl-lpuart.yaml), but it looks like none of in-tree DTS use it.
> 
> Fixes: ad21e3840a88 ("dt-bindings: soc: fsl: Convert rcpm to yaml format")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/soc/fsl/fsl,rcpm.yaml         | 11 +----------
>  1 file changed, 1 insertion(+), 10 deletions(-)
> 

Applied, thanks!

On Sun, Aug 11, 2024 at 05:35:07PM +0200, Krzysztof Kozlowski wrote:
> Drop the RCPM consumer example from the binding (LPUART device node),
> because:
> 1. Using phandles is typical syntax, thus explaining it is not needed in
>    the provider binding,
> 2. It has 'fsl,rcpm-wakeup' property which is not allowed by LPUART
>    binding so it causes dt_binding_check warning:
> 
>    fsl,rcpm.example.dtb: serial@2950000: Unevaluated properties are not allowed ('fsl,rcpm-wakeup' was unexpected)
>      from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
> 
> Alternatively, this property could be added to LPUART binding
> (fsl-lpuart.yaml), but it looks like none of in-tree DTS use it.
> 
> Fixes: ad21e3840a88 ("dt-bindings: soc: fsl: Convert rcpm to yaml format")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

On Sun, Aug 11, 2024 at 05:35:07PM +0200, Krzysztof Kozlowski wrote:
> Drop the RCPM consumer example from the binding (LPUART device node),
> because:
> 1. Using phandles is typical syntax, thus explaining it is not needed in
>    the provider binding,
> 2. It has 'fsl,rcpm-wakeup' property which is not allowed by LPUART
>    binding so it causes dt_binding_check warning:
>
>    fsl,rcpm.example.dtb: serial@2950000: Unevaluated properties are not allowed ('fsl,rcpm-wakeup' was unexpected)
>      from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
>
> Alternatively, this property could be added to LPUART binding
> (fsl-lpuart.yaml), but it looks like none of in-tree DTS use it.
>
> Fixes: ad21e3840a88 ("dt-bindings: soc: fsl: Convert rcpm to yaml format")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  .../devicetree/bindings/soc/fsl/fsl,rcpm.yaml         | 11 +----------
>  1 file changed, 1 insertion(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
> index a7db0aad2b25..03d71ab930d7 100644
> --- a/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
> +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
> @@ -80,17 +80,8 @@ additionalProperties: false
>  examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> -    rcpm: global-utilities@e2000 {
> +    global-utilities@e2000 {
>            compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
>            reg = <0xe2000 0x1000>;
>            #fsl,rcpm-wakeup-cells = <2>;
>      };
> -
> -    serial@2950000 {
> -         compatible = "fsl,ls1021a-lpuart";
> -         reg = <0x2950000 0x1000>;
> -         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> -         clocks = <&sysclk>;
> -         clock-names = "ipg";
> -         fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
> -    };
> --
> 2.43.0
>