Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 8 ++++----
arch/arm64/boot/dts/ti/k3-am65.dtsi | 13 ++++++-------
2 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 43c6118d2bf0f..5948ab3b50fc2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -292,13 +292,13 @@ fss: bus@47000000 {
ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
<0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
<0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
- <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
- <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
+ <0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>, /* OSPI0/1 Memory 1 */
+ <0x4 0x00000000 0x4 0x00000000 0x4 0x00000000>; /* OSPI0/1 Memory 0/3 */
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47040000 0x0 0x100>,
- <0x5 0x00000000 0x1 0x0000000>;
+ <0x5 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
@@ -316,7 +316,7 @@ ospi0: spi@47040000 {
ospi1: spi@47050000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47050000 0x0 0x100>,
- <0x7 0x00000000 0x1 0x00000000>;
+ <0x7 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index c59baebc5a25b..5b8cbdd6942e7 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -69,11 +69,11 @@ cbass_main: bus@100000 {
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
- <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
<0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
- <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
- <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
- <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>,
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
cbass_mcu: bus@28380000 {
compatible = "simple-bus";
@@ -89,9 +89,8 @@ cbass_mcu: bus@28380000 {
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
- <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
- <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS Data Region 1 */
+ <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS Data Region 0/3 */
cbass_wakeup: bus@42040000 {
compatible = "simple-bus";
--
2.39.2
Hi, Andrew, Thanks for the series! On 01/08/24 23:19, Andrew Davis wrote: > Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although > not used currently by the Linux FSS driver, these regions belong to > the FSS and should be included in the ranges mapping. > > While here, a couple of these numbers had missing zeros which was > hidden by odd alignments, fix both these issues. > > Signed-off-by: Andrew Davis <afd@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 8 ++++---- > arch/arm64/boot/dts/ti/k3-am65.dtsi | 13 ++++++------- > 2 files changed, 10 insertions(+), 11 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi > index 43c6118d2bf0f..5948ab3b50fc2 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi > @@ -292,13 +292,13 @@ fss: bus@47000000 { > ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */ > <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */ > <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */ > - <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */ > - <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */ > + <0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>, /* OSPI0/1 Memory 1 */ > + <0x4 0x00000000 0x4 0x00000000 0x4 0x00000000>; /* OSPI0/1 Memory 0/3 */ > > ospi0: spi@47040000 { > compatible = "ti,am654-ospi", "cdns,qspi-nor"; > reg = <0x0 0x47040000 0x0 0x100>, > - <0x5 0x00000000 0x1 0x0000000>; > + <0x5 0x00000000 0x1 0x00000000>; > interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>; > cdns,fifo-depth = <256>; > cdns,fifo-width = <4>; > @@ -316,7 +316,7 @@ ospi0: spi@47040000 { > ospi1: spi@47050000 { > compatible = "ti,am654-ospi", "cdns,qspi-nor"; > reg = <0x0 0x47050000 0x0 0x100>, > - <0x7 0x00000000 0x1 0x00000000>; > + <0x7 0x00000000 0x1 0x00000000>; > interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; > cdns,fifo-depth = <256>; > cdns,fifo-width = <4>; > diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi > index c59baebc5a25b..5b8cbdd6942e7 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi > @@ -69,11 +69,11 @@ cbass_main: bus@100000 { > <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, > <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, > <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, > - <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, > <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */ > - <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, > - <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, > - <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; > + <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, > + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, > + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; The changes you made to merge the 'FSS Data Region' range in 'cbass_mcu' node is not reflected here. Can you please add those changes here, so that the ranges looks consistent throughout. Apart from this, the series LGTM! Reviewed-by: Santhosh Kumar K <s-k6@ti.com> > > cbass_mcu: bus@28380000 { > compatible = "simple-bus"; > @@ -89,9 +89,8 @@ cbass_mcu: bus@28380000 { > <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ > <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ > <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */ > - <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */ > - <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ > - <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS Data Region 1 */ > + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS Data Region 0/3 */ > > cbass_wakeup: bus@42040000 { > compatible = "simple-bus";
© 2016 - 2024 Red Hat, Inc.