The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
used to build Energy Model which in turn is used by EAS to take
placement decisions.

Signed-off-by: Ankit Sharma <quic_anshar@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 3bb609c9d2ec..ab15556e0647 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -68,6 +68,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -88,6 +90,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&L2_1>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -103,6 +107,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&L2_2>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_2: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -118,6 +124,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&L2_3>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_3: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -133,6 +141,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&L2_4>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_4: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -154,6 +164,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&L2_5>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_5: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -169,6 +181,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&L2_6>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_6: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -184,6 +198,8 @@
 			enable-method = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&L2_7>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_7: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
-- 
2.17.1

On Wed, 31 Jul 2024 16:49:51 +0530, Ankit Sharma wrote:
> The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
> used to build Energy Model which in turn is used by EAS to take
> placement decisions.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: sa8775p: Add capacity and DPC properties
      commit: 717ca334afd7ceb8170aa1bdad736f6a712c9220

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>