On 31/07/2024 08:18, Dang Huynh wrote:
> F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling
> touch screen VDD/VDDIO and keyboard's caps lock LED.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> ---
> arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> index 70f479a63f2e..47e446249af6 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
> @@ -70,6 +70,23 @@ &dispcc {
> status = "disabled";
> };
>
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> + /* Clock frequency was not specified downstream, let's park it to 100 KHz */
This is the default, so you can drop this comment.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
> + clock-frequency = <100000>;
> +
> + pca9534: gpio@21 {
> + compatible = "nxp,pca9534";
> + reg = <0x21>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +};
> +
> &pm6125_gpios {
> vol_up_n: vol-up-n-state {
> pins = "gpio5";
> @@ -89,6 +106,10 @@ &pon_resin {
> status = "okay";
> };
>
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> &rpm_requests {
> regulators-0 {
> compatible = "qcom,rpm-pm6125-regulators";
>
--
// Caleb (they/them)