As most other board Miix uses board-id = 0xff, so define calibration
variant to distinguish it from other devices with the same chip_id.

qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002

Cc: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index fad5f390171a..901f6ac0084d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -99,3 +99,7 @@ i2c5_hid_active: i2c5-hid-active-state {
 		drive-strength = <2>;
 	};
 };
+
+&wifi {
+	qcom,ath10k-calibration-variant = "Lenovo_Miix630";
+};

-- 
2.39.2

On 7/23/2024 5:28 AM, Dmitry Baryshkov wrote:
> As most other board Miix uses board-id = 0xff, so define calibration
> variant to distinguish it from other devices with the same chip_id.
> 
> qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002
> 
> Cc: Kalle Valo <kvalo@kernel.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

On 23.07.2024 1:28 PM, Dmitry Baryshkov wrote:
> As most other board Miix uses board-id = 0xff, so define calibration
> variant to distinguish it from other devices with the same chip_id.
> 
> qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002
> 
> Cc: Kalle Valo <kvalo@kernel.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad