RTC is able to output on a pin the "LSE" internal clock.

STM32 RTC is now registered as a clock provider.
It provides rtc_lsco clock, that means RTC_LSCO is output on either
RTC_OUT1 or RTC_OUT2_RMP, depending on pinmux DT property.
The clock is marked as CLK_IGNORE_UNUSED and CLK_IS_CRITICAL because
RTC_LSCO can be early required by devices needed it to init.

Add LSCO in pinmux functions.

Add "stm32_rtc_clean_outs" to disable LSCO. As RTC is part of "backup"
power domain, it is not reset during shutdown or reboot. So force LSCO
disable at probe.

Co-developed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
---
 drivers/rtc/Kconfig     |   1 +
 drivers/rtc/rtc-stm32.c | 101 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 102 insertions(+)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 9c88eb580209..52f5f9ec7e9f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1924,6 +1924,7 @@ config RTC_DRV_STM32
 	select REGMAP_MMIO
 	select PINMUX
 	select GENERIC_PINCONF
+	select COMMON_CLK
 	depends on ARCH_STM32 || COMPILE_TEST
 	help
 	   If you say yes here you get support for the STM32 On-Chip
diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index 6dfd9dc07e2e..675860a13051 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -7,6 +7,7 @@
 #include <linux/bcd.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/errno.h>
 #include <linux/iopoll.h>
 #include <linux/ioport.h>
@@ -45,6 +46,10 @@
 #define STM32_RTC_CR_FMT		BIT(6)
 #define STM32_RTC_CR_ALRAE		BIT(8)
 #define STM32_RTC_CR_ALRAIE		BIT(12)
+#define STM32_RTC_CR_OSEL		GENMASK(22, 21)
+#define STM32_RTC_CR_COE		BIT(23)
+#define STM32_RTC_CR_TAMPOE		BIT(26)
+#define STM32_RTC_CR_OUT2EN		BIT(31)
 
 /* STM32_RTC_ISR/STM32_RTC_ICSR bit fields */
 #define STM32_RTC_ISR_ALRAWF		BIT(0)
@@ -81,6 +86,12 @@
 /* STM32_RTC_SR/_SCR bit fields */
 #define STM32_RTC_SR_ALRA		BIT(0)
 
+/* STM32_RTC_CFGR bit fields */
+#define STM32_RTC_CFGR_OUT2_RMP		BIT(0)
+#define STM32_RTC_CFGR_LSCOEN		GENMASK(2, 1)
+#define STM32_RTC_CFGR_LSCOEN_OUT1	1
+#define STM32_RTC_CFGR_LSCOEN_OUT2_RMP	2
+
 /* STM32_RTC_VERR bit fields */
 #define STM32_RTC_VERR_MINREV_SHIFT	0
 #define STM32_RTC_VERR_MINREV		GENMASK(3, 0)
@@ -130,6 +141,7 @@ struct stm32_rtc_registers {
 	u16 wpr;
 	u16 sr;
 	u16 scr;
+	u16 cfgr;
 	u16 verr;
 };
 
@@ -145,6 +157,7 @@ struct stm32_rtc_data {
 	bool need_dbp;
 	bool need_accuracy;
 	bool rif_protected;
+	bool has_lsco;
 };
 
 struct stm32_rtc {
@@ -157,6 +170,7 @@ struct stm32_rtc {
 	struct clk *rtc_ck;
 	const struct stm32_rtc_data *data;
 	int irq_alarm;
+	struct clk *clk_lsco;
 };
 
 struct stm32_rtc_rif_resource {
@@ -231,7 +245,68 @@ struct stm32_rtc_pinmux_func {
 	int (*action)(struct pinctrl_dev *pctl_dev, unsigned int pin);
 };
 
+static int stm32_rtc_pinmux_lsco_available(struct pinctrl_dev *pctldev, unsigned int pin)
+{
+	struct stm32_rtc *rtc = pinctrl_dev_get_drvdata(pctldev);
+	struct stm32_rtc_registers regs = rtc->data->regs;
+	unsigned int cr = readl_relaxed(rtc->base + regs.cr);
+	unsigned int cfgr = readl_relaxed(rtc->base + regs.cfgr);
+	unsigned int calib = STM32_RTC_CR_COE;
+	unsigned int tampalrm = STM32_RTC_CR_TAMPOE | STM32_RTC_CR_OSEL;
+
+	switch (pin) {
+	case OUT1:
+		if ((!(cr & STM32_RTC_CR_OUT2EN) &&
+		     ((cr & calib) || cr & tampalrm)) ||
+		     ((cr & calib) && (cr & tampalrm)))
+			return -EBUSY;
+		break;
+	case OUT2_RMP:
+		if ((cr & STM32_RTC_CR_OUT2EN) &&
+		    (cfgr & STM32_RTC_CFGR_OUT2_RMP) &&
+		    ((cr & calib) || (cr & tampalrm)))
+			return -EBUSY;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (clk_get_rate(rtc->rtc_ck) != 32768)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int stm32_rtc_pinmux_action_lsco(struct pinctrl_dev *pctldev, unsigned int pin)
+{
+	struct stm32_rtc *rtc = pinctrl_dev_get_drvdata(pctldev);
+	struct stm32_rtc_registers regs = rtc->data->regs;
+	struct device *dev = rtc->rtc_dev->dev.parent;
+	u8 lscoen;
+	int ret;
+
+	if (!rtc->data->has_lsco)
+		return -EPERM;
+
+	ret = stm32_rtc_pinmux_lsco_available(pctldev, pin);
+	if (ret)
+		return ret;
+
+	lscoen = (pin == OUT1) ? STM32_RTC_CFGR_LSCOEN_OUT1 : STM32_RTC_CFGR_LSCOEN_OUT2_RMP;
+
+	rtc->clk_lsco = clk_register_gate(dev, "rtc_lsco", __clk_get_name(rtc->rtc_ck),
+					  CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+					  rtc->base + regs.cfgr, lscoen, 0, NULL);
+	if (IS_ERR(rtc->clk_lsco))
+		return PTR_ERR(rtc->clk_lsco);
+
+	of_clk_add_provider(dev->of_node, of_clk_src_simple_get, rtc->clk_lsco);
+
+	return 0;
+}
+
 static const struct stm32_rtc_pinmux_func stm32_rtc_pinmux_functions[] = {
+	STM32_RTC_PINMUX("lsco", &stm32_rtc_pinmux_action_lsco, "out1", "out2_rmp"),
 };
 
 static int stm32_rtc_pinmux_get_functions_count(struct pinctrl_dev *pctldev)
@@ -687,6 +762,7 @@ static const struct stm32_rtc_data stm32_rtc_data = {
 	.need_dbp = true,
 	.need_accuracy = false,
 	.rif_protected = false,
+	.has_lsco = false,
 	.regs = {
 		.tr = 0x00,
 		.dr = 0x04,
@@ -697,6 +773,7 @@ static const struct stm32_rtc_data stm32_rtc_data = {
 		.wpr = 0x24,
 		.sr = 0x0C, /* set to ISR offset to ease alarm management */
 		.scr = UNDEF_REG,
+		.cfgr = UNDEF_REG,
 		.verr = UNDEF_REG,
 	},
 	.events = {
@@ -710,6 +787,7 @@ static const struct stm32_rtc_data stm32h7_rtc_data = {
 	.need_dbp = true,
 	.need_accuracy = false,
 	.rif_protected = false,
+	.has_lsco = false,
 	.regs = {
 		.tr = 0x00,
 		.dr = 0x04,
@@ -720,6 +798,7 @@ static const struct stm32_rtc_data stm32h7_rtc_data = {
 		.wpr = 0x24,
 		.sr = 0x0C, /* set to ISR offset to ease alarm management */
 		.scr = UNDEF_REG,
+		.cfgr = UNDEF_REG,
 		.verr = UNDEF_REG,
 	},
 	.events = {
@@ -742,6 +821,7 @@ static const struct stm32_rtc_data stm32mp1_data = {
 	.need_dbp = false,
 	.need_accuracy = true,
 	.rif_protected = false,
+	.has_lsco = true,
 	.regs = {
 		.tr = 0x00,
 		.dr = 0x04,
@@ -752,6 +832,7 @@ static const struct stm32_rtc_data stm32mp1_data = {
 		.wpr = 0x24,
 		.sr = 0x50,
 		.scr = 0x5C,
+		.cfgr = 0x60,
 		.verr = 0x3F4,
 	},
 	.events = {
@@ -765,6 +846,7 @@ static const struct stm32_rtc_data stm32mp25_data = {
 	.need_dbp = false,
 	.need_accuracy = true,
 	.rif_protected = true,
+	.has_lsco = true,
 	.regs = {
 		.tr = 0x00,
 		.dr = 0x04,
@@ -775,6 +857,7 @@ static const struct stm32_rtc_data stm32mp25_data = {
 		.wpr = 0x24,
 		.sr = 0x50,
 		.scr = 0x5C,
+		.cfgr = 0x60,
 		.verr = 0x3F4,
 	},
 	.events = {
@@ -792,6 +875,19 @@ static const struct of_device_id stm32_rtc_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
 
+static void stm32_rtc_clean_outs(struct stm32_rtc *rtc)
+{
+	struct stm32_rtc_registers regs = rtc->data->regs;
+
+	if (regs.cfgr != UNDEF_REG) {
+		unsigned int cfgr = readl_relaxed(rtc->base + regs.cfgr);
+
+		cfgr &= ~STM32_RTC_CFGR_LSCOEN;
+		cfgr &= ~STM32_RTC_CFGR_OUT2_RMP;
+		writel_relaxed(cfgr, rtc->base + regs.cfgr);
+	}
+}
+
 static int stm32_rtc_check_rif(struct stm32_rtc *stm32_rtc,
 			       struct stm32_rtc_rif_resource res)
 {
@@ -1024,6 +1120,8 @@ static int stm32_rtc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	stm32_rtc_clean_outs(rtc);
+
 	ret = devm_pinctrl_register_and_init(&pdev->dev, &stm32_rtc_pdesc, rtc, &pctl);
 	if (ret)
 		return dev_err_probe(&pdev->dev, ret, "pinctrl register failed");
@@ -1070,6 +1168,9 @@ static void stm32_rtc_remove(struct platform_device *pdev)
 	const struct stm32_rtc_registers *regs = &rtc->data->regs;
 	unsigned int cr;
 
+	if (!IS_ERR_OR_NULL(rtc->clk_lsco))
+		clk_unregister_gate(rtc->clk_lsco);
+
 	/* Disable interrupts */
 	stm32_rtc_wpr_unlock(rtc);
 	cr = readl_relaxed(rtc->base + regs->cr);
-- 
2.25.1

Hi Valentin,

kernel test robot noticed the following build errors:

[auto build test ERROR on abelloni/rtc-next]
[also build test ERROR on next-20240719]
[cannot apply to atorgue-stm32/stm32-next robh/for-next linus/master v6.10]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Valentin-Caron/dt-bindings-rtc-stm32-describe-pinmux-nodes/20240717-193541
base:   https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git rtc-next
patch link:    https://lore.kernel.org/r/20240717074835.2210411-4-valentin.caron%40foss.st.com
patch subject: [PATCH v2 3/4] rtc: stm32: add Low Speed Clock Output (LSCO) support
config: um-randconfig-r063-20240718 (https://download.01.org/0day-ci/archive/20240719/202407191830.8bh5dJ09-lkp@intel.com/config)
compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project ad154281230d83ee551e12d5be48bb956ef47ed3)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240719/202407191830.8bh5dJ09-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202407191830.8bh5dJ09-lkp@intel.com/

All errors (new ones prefixed by >>, old ones prefixed by <<):

WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/backlight/platform_lcd.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_accel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_DAC1064.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_Ti3026.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/macmodes.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/kyro/kyrofb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/goldfishfb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6765-audio.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-mm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-img.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-vdec.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-venc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-aud.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6797-img.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6797-vdec.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6797-venc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-apmixedsys.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-bdp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-mfg.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-vdec.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-venc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-eth.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-aud.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7988-apmixed.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7988-topckgen.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7988-infracfg.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-apmixedsys.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-cam.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-img.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-ipu0.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-ipu_conn.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-mm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-vdec.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-venc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-apmixedsys.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-topckgen.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-infra_ao.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-imp_iic_wrap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-mdp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-mfg.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-mm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8186-venc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-apmixedsys.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-topckgen.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-peri_ao.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-infra_ao.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-imp_iic_wrap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-vdo0.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-vdo1.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-aud.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-cam.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-img.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-imp_iic_wrap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-ipe.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-mdp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-msdc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-scp_adsp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-venc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8195-cam.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8195-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8195-mfg.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8195-venc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8195-vpp0.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8195-vpp1.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-apu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sophgo/clk-sophgo-cv1800.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/reset/hisilicon/hi6220_reset.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/8250/8250_base.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/8250/8250_pxa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/owl-uart.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/n_hdlc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/goldfish.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-auo-a030jtn01.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-sccb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_mem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-omap2-mcspi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/uio/uio_aec.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/uio/uio_netx.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pcmcia/yenta_socket.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-ccgx-ucsi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-qup.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/au8522_decoder.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/mb86a16.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-async.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-fwnode.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/watchdog/menz69_wdt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/tmio_mmc_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/renesas_sdhi_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/mmc_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/sdio_uart.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/crypto/xilinx/zynqmp-aes-gcm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem-apple-efuses.o
ERROR: modpost: "devm_pinctrl_register_and_init" [drivers/rtc/rtc-stm32.ko] undefined!
ERROR: modpost: "pinctrl_enable" [drivers/rtc/rtc-stm32.ko] undefined!
ERROR: modpost: "pinconf_generic_dt_node_to_map" [drivers/rtc/rtc-stm32.ko] undefined!
>> ERROR: modpost: "pinctrl_dev_get_drvdata" [drivers/rtc/rtc-stm32.ko] undefined!
ERROR: modpost: "pinconf_generic_dt_free_map" [drivers/rtc/rtc-stm32.ko] undefined!
WARNING: modpost: EXPORT symbol "csum_partial" [vmlinux] version generation failed, symbol will not be versioned.
Is "csum_partial" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "csum_partial_copy_generic" [vmlinux] version generation failed, symbol will not be versioned.
Is "csum_partial_copy_generic" prototyped in <asm/asm-prototypes.h>?

Kconfig warnings: (for reference only)
   WARNING: unmet direct dependencies detected for GENERIC_PINCONF
   Depends on [n]: PINCTRL [=n]
   Selected by [m]:
   - RTC_DRV_STM32 [=m] && RTC_CLASS [=y] && (ARCH_STM32 || COMPILE_TEST [=y])
   WARNING: unmet direct dependencies detected for PINMUX
   Depends on [n]: PINCTRL [=n]
   Selected by [m]:
   - RTC_DRV_STM32 [=m] && RTC_CLASS [=y] && (ARCH_STM32 || COMPILE_TEST [=y])

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Hi Valentin,

kernel test robot noticed the following build warnings:

[auto build test WARNING on abelloni/rtc-next]
[also build test WARNING on next-20240718]
[cannot apply to atorgue-stm32/stm32-next robh/for-next linus/master v6.10]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Valentin-Caron/dt-bindings-rtc-stm32-describe-pinmux-nodes/20240717-193541
base:   https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git rtc-next
patch link:    https://lore.kernel.org/r/20240717074835.2210411-4-valentin.caron%40foss.st.com
patch subject: [PATCH v2 3/4] rtc: stm32: add Low Speed Clock Output (LSCO) support
config: m68k-kismet-CONFIG_COMMON_CLK-CONFIG_RTC_DRV_STM32-0-0 (https://download.01.org/0day-ci/archive/20240718/202407181525.BRNKqmNf-lkp@intel.com/config)
reproduce: (https://download.01.org/0day-ci/archive/20240718/202407181525.BRNKqmNf-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202407181525.BRNKqmNf-lkp@intel.com/

kismet warnings: (new ones prefixed by >>)
>> kismet: WARNING: unmet direct dependencies detected for COMMON_CLK when selected by RTC_DRV_STM32
   WARNING: unmet direct dependencies detected for COMMON_CLK
     Depends on [n]: !HAVE_LEGACY_CLK [=y]
     Selected by [y]:
     - RTC_DRV_STM32 [=y] && RTC_CLASS [=y] && (ARCH_STM32 || COMPILE_TEST [=y])
   
   WARNING: unmet direct dependencies detected for GENERIC_PINCONF
     Depends on [n]: PINCTRL [=n]
     Selected by [y]:
     - RTC_DRV_STM32 [=y] && RTC_CLASS [=y] && (ARCH_STM32 || COMPILE_TEST [=y])
   
   WARNING: unmet direct dependencies detected for PINMUX
     Depends on [n]: PINCTRL [=n]
     Selected by [y]:
     - RTC_DRV_STM32 [=y] && RTC_CLASS [=y] && (ARCH_STM32 || COMPILE_TEST [=y])

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki