On 7/12/2024 8:09 PM, neil.armstrong@linaro.org wrote:
> Hi,
>
> On 12/07/2024 14:43, Satya Priya Kakitapalli wrote:
>> Add bindings, driver and DT for the Qualcomm's MBG thermal
>> monitoring device.
>>
>> Please note that this series is dependent on [1] which adds
>> ADC5-GEN3 support.
>>
>> [1]
>> https://lore.kernel.org/linux-iio/20231231171237.3322376-1-quic_jprakash@quicinc.com/
>
> Since this dependency was sent almost 7 months ago, and had plenty of
> changes requests,
> this patchset should've been either delayed until a proper support of
> ADC5-GEN3
> was accepted or marked as RFC.
>
Sure, I'll re-base my patches on the recently posted version of
ADC5-GEN3 patches and post my V2 as RFC.
>>
>> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
>> ---
>> Satya Priya Kakitapalli (5):
>> dt-bindings: iio: adc: Add ADC5 GEN3 Channel info for pm8775 PMIC
>> dt-bindings: thermal: qcom: Add MBG thermal monitor bindings
>> thermal: qcom: Add support for MBG Temp monitor
>> ARM: dts: qcom: Add vadc support for pm8775 pmic on SA8775P
>> ARM: dts: qcom: Add support for MBG TM for pm8775 on SA8775P
>
> Those should be: "arm64: dts: qcom: sa8775p-pmics: ..."
>
Okay.
>>
>> .../bindings/thermal/qcom-spmi-mbg-tm.yaml | 63 +++++
>> arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 210
>> ++++++++++++++++
>> drivers/thermal/qcom/Kconfig | 11 +
>> drivers/thermal/qcom/Makefile | 1 +
>> drivers/thermal/qcom/qcom-spmi-mbg-tm.c | 269
>> +++++++++++++++++++++
>> .../iio/adc/qcom,spmi-adc5-gen3-pm8775.h | 42 ++++
>> 6 files changed, 596 insertions(+)
>> ---
>> base-commit: c27723304c1f6af79f7bece5edacace6a8d46167
>> change-id: 20240627-mbg-tm-support-7bbf25c246e1
>>
>> Best regards,
>
> Neil
>