1. Patchew
  2. linux
  3. [PATCH 0/6] remoteproc: imx_rproc: various patches for misc
  4. View patch

[PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP

Peng Fan (OSS) posted 6 patches 1 year, 7 months ago
There is a newer version of this series
[PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
Posted by Peng Fan (OSS) 1 year, 7 months ago 
From: Peng Fan <peng.fan@nxp.com>

The i.MX7ULP Cortex-A7 is under control of Cortex-M4. The i.MX7ULP Linux
poweroff and restart rely on rpmsg driver to send a message to Cortex-M4
firmware. Then Cortex-A7 could poweroff or restart by Cortex-M4 to
configure the i.MX7ULP power controller properly.

However the reboot and restart kernel common code use atomic notifier,
so with blocking tx mailbox will trigger kernel dump, because of
blocking mailbox will use wait_for_completion_timeout. In such case,
linux no need to wait for completion.

Current patch is to use non-blocking tx mailbox channel when system
is going to poweroff or restart.

Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_rproc.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 01cf1dfb2e87..e1abf110abc9 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -18,6 +18,7 @@
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
+#include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
 #include <linux/workqueue.h>
@@ -114,6 +115,7 @@ struct imx_rproc {
 	u32				entry;		/* cpu start address */
 	u32				core_index;
 	struct dev_pm_domain_list	*pd_list;
+	struct sys_off_data		data;
 };
 
 static const struct imx_rproc_att imx_rproc_att_imx93[] = {
@@ -1050,6 +1052,22 @@ static int imx_rproc_clk_enable(struct imx_rproc *priv)
 	return 0;
 }
 
+static int imx_rproc_sys_off_handler(struct sys_off_data *data)
+{
+	struct rproc *rproc = data->cb_data;
+	int ret;
+
+	imx_rproc_free_mbox(rproc);
+
+	ret = imx_rproc_xtr_mbox_init(rproc, false);
+	if (ret) {
+		dev_err(&rproc->dev, "Failed to request non-blocking mbox\n");
+		return NOTIFY_BAD;
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int imx_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1104,6 +1122,24 @@ static int imx_rproc_probe(struct platform_device *pdev)
 	if (rproc->state != RPROC_DETACHED)
 		rproc->auto_boot = of_property_read_bool(np, "fsl,auto-boot");
 
+	if (of_device_is_compatible(dev->of_node, "fsl,imx7ulp-cm4")) {
+		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF_PREPARE,
+						    SYS_OFF_PRIO_DEFAULT,
+						    imx_rproc_sys_off_handler, rproc);
+		if (ret) {
+			dev_err(dev, "register power off handler failure\n");
+			goto err_put_clk;
+		}
+
+		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART_PREPARE,
+						    SYS_OFF_PRIO_DEFAULT,
+						    imx_rproc_sys_off_handler, rproc);
+		if (ret) {
+			dev_err(dev, "register restart handler failure\n");
+			goto err_put_clk;
+		}
+	}
+
 	ret = rproc_add(rproc);
 	if (ret) {
 		dev_err(dev, "rproc_add failed\n");

-- 
2.37.1
Re: [PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
Posted by Frank Li 1 year, 6 months ago 
On Fri, Jul 12, 2024 at 04:34:59PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> The i.MX7ULP Cortex-A7 is under control of Cortex-M4. The i.MX7ULP Linux
> poweroff and restart rely on rpmsg driver to send a message to Cortex-M4
> firmware. Then Cortex-A7 could poweroff or restart by Cortex-M4 to
> configure the i.MX7ULP power controller properly.
>
> However the reboot and restart kernel common code use atomic notifier,
> so with blocking tx mailbox will trigger kernel dump, because of
> blocking mailbox will use wait_for_completion_timeout. In such case,
> linux no need to wait for completion.
>
> Current patch is to use non-blocking tx mailbox channel when system
> is going to poweroff or restart.
>
> Reviewed-by: Jacky Bai <ping.bai@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 01cf1dfb2e87..e1abf110abc9 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -18,6 +18,7 @@
>  #include <linux/of_reserved_mem.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
> +#include <linux/reboot.h>
>  #include <linux/regmap.h>
>  #include <linux/remoteproc.h>
>  #include <linux/workqueue.h>
> @@ -114,6 +115,7 @@ struct imx_rproc {
>  	u32				entry;		/* cpu start address */
>  	u32				core_index;
>  	struct dev_pm_domain_list	*pd_list;
> +	struct sys_off_data		data;
>  };
>
>  static const struct imx_rproc_att imx_rproc_att_imx93[] = {
> @@ -1050,6 +1052,22 @@ static int imx_rproc_clk_enable(struct imx_rproc *priv)
>  	return 0;
>  }
>
> +static int imx_rproc_sys_off_handler(struct sys_off_data *data)
> +{
> +	struct rproc *rproc = data->cb_data;
> +	int ret;
> +
> +	imx_rproc_free_mbox(rproc);
> +
> +	ret = imx_rproc_xtr_mbox_init(rproc, false);
> +	if (ret) {
> +		dev_err(&rproc->dev, "Failed to request non-blocking mbox\n");
> +		return NOTIFY_BAD;
> +	}
> +
> +	return NOTIFY_DONE;
> +}
> +
>  static int imx_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1104,6 +1122,24 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	if (rproc->state != RPROC_DETACHED)
>  		rproc->auto_boot = of_property_read_bool(np, "fsl,auto-boot");
>
> +	if (of_device_is_compatible(dev->of_node, "fsl,imx7ulp-cm4")) {

I don't suggest check compatible string. It'd better add a field  in
imx_rproc_dcfg, such as need_sys_off

	if (dcfg->need_sys_off) {
		...
	}

If there are new compatible string added, just need set need_sys_off to
true in driver data.

Frank

> +		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF_PREPARE,
> +						    SYS_OFF_PRIO_DEFAULT,
> +						    imx_rproc_sys_off_handler, rproc);
> +		if (ret) {
> +			dev_err(dev, "register power off handler failure\n");
> +			goto err_put_clk;
> +		}
> +
> +		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART_PREPARE,
> +						    SYS_OFF_PRIO_DEFAULT,
> +						    imx_rproc_sys_off_handler, rproc);
> +		if (ret) {
> +			dev_err(dev, "register restart handler failure\n");
> +			goto err_put_clk;
> +		}
> +	}
> +
>  	ret = rproc_add(rproc);
>  	if (ret) {
>  		dev_err(dev, "rproc_add failed\n");
>
> --
> 2.37.1
>
Re: [PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
Posted by Mathieu Poirier 1 year, 6 months ago 
On Fri, Jul 12, 2024 at 04:34:59PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> The i.MX7ULP Cortex-A7 is under control of Cortex-M4. The i.MX7ULP Linux
> poweroff and restart rely on rpmsg driver to send a message to Cortex-M4
> firmware. Then Cortex-A7 could poweroff or restart by Cortex-M4 to
> configure the i.MX7ULP power controller properly.
> 
> However the reboot and restart kernel common code use atomic notifier,
> so with blocking tx mailbox will trigger kernel dump, because of
> blocking mailbox will use wait_for_completion_timeout. In such case,
> linux no need to wait for completion.
> 
> Current patch is to use non-blocking tx mailbox channel when system
> is going to poweroff or restart.
> 
> Reviewed-by: Jacky Bai <ping.bai@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 01cf1dfb2e87..e1abf110abc9 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -18,6 +18,7 @@
>  #include <linux/of_reserved_mem.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
> +#include <linux/reboot.h>
>  #include <linux/regmap.h>
>  #include <linux/remoteproc.h>
>  #include <linux/workqueue.h>
> @@ -114,6 +115,7 @@ struct imx_rproc {
>  	u32				entry;		/* cpu start address */
>  	u32				core_index;
>  	struct dev_pm_domain_list	*pd_list;
> +	struct sys_off_data		data;
>  };
>  
>  static const struct imx_rproc_att imx_rproc_att_imx93[] = {
> @@ -1050,6 +1052,22 @@ static int imx_rproc_clk_enable(struct imx_rproc *priv)
>  	return 0;
>  }
>  
> +static int imx_rproc_sys_off_handler(struct sys_off_data *data)
> +{
> +	struct rproc *rproc = data->cb_data;
> +	int ret;
> +
> +	imx_rproc_free_mbox(rproc);
> +
> +	ret = imx_rproc_xtr_mbox_init(rproc, false);

This is new functionality and has nothing to do with the rest of this set.
Please introduce patches 5/6 and 6/6 as part of a new patchset.

Thanks,
Mathieu

> +	if (ret) {
> +		dev_err(&rproc->dev, "Failed to request non-blocking mbox\n");
> +		return NOTIFY_BAD;
> +	}
> +
> +	return NOTIFY_DONE;
> +}
> +
>  static int imx_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1104,6 +1122,24 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	if (rproc->state != RPROC_DETACHED)
>  		rproc->auto_boot = of_property_read_bool(np, "fsl,auto-boot");
>  
> +	if (of_device_is_compatible(dev->of_node, "fsl,imx7ulp-cm4")) {
> +		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF_PREPARE,
> +						    SYS_OFF_PRIO_DEFAULT,
> +						    imx_rproc_sys_off_handler, rproc);
> +		if (ret) {
> +			dev_err(dev, "register power off handler failure\n");
> +			goto err_put_clk;
> +		}
> +
> +		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART_PREPARE,
> +						    SYS_OFF_PRIO_DEFAULT,
> +						    imx_rproc_sys_off_handler, rproc);
> +		if (ret) {
> +			dev_err(dev, "register restart handler failure\n");
> +			goto err_put_clk;
> +		}
> +	}
> +
>  	ret = rproc_add(rproc);
>  	if (ret) {
>  		dev_err(dev, "rproc_add failed\n");
> 
> -- 
> 2.37.1
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.