[PATCH v3 11/11] riscv: dts: spacemit: add uart1 node for K1 SoC

Yixun Lan posted 11 patches 1 year, 7 months ago
There is a newer version of this series
[PATCH v3 11/11] riscv: dts: spacemit: add uart1 node for K1 SoC
Posted by Yixun Lan 1 year, 7 months ago
Devices in 0xf000,0000 - 0xf080,0000 are reserved for TEE purpose,
so add uart1 here but mark its status as reserved.

Signed-off-by: Yixun Lan <dlan@gentoo.org>

---
This patch can be folded into "riscv: dts: add initial SpacemiT K1 SoC device tree",
if maintainer finds it's too trivial to have an independent patch..
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index a076e35855a2e..fee8921513c1f 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -372,5 +372,15 @@ clint: timer@e4000000 {
 					      <&cpu6_intc 3>, <&cpu6_intc 7>,
 					      <&cpu7_intc 3>, <&cpu7_intc 7>;
 		};
+
+		sec_uart1: serial@f0612000 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xf0612000 0x0 0x100>;
+			interrupts = <43>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "reserved"; /* for TEE usage */
+		};
 	};
 };

-- 
2.45.2
Re: [PATCH v3 11/11] riscv: dts: spacemit: add uart1 node for K1 SoC
Posted by Jisheng Zhang 1 year, 7 months ago
On Wed, Jul 03, 2024 at 02:55:14PM +0000, Yixun Lan wrote:
> Devices in 0xf000,0000 - 0xf080,0000 are reserved for TEE purpose,
> so add uart1 here but mark its status as reserved.

This patch doesn't deserve a seperate patch, it's better to fold it
into the dtsi one.

> 
> Signed-off-by: Yixun Lan <dlan@gentoo.org>
> 
> ---
> This patch can be folded into "riscv: dts: add initial SpacemiT K1 SoC device tree",
> if maintainer finds it's too trivial to have an independent patch..
> ---
>  arch/riscv/boot/dts/spacemit/k1.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index a076e35855a2e..fee8921513c1f 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -372,5 +372,15 @@ clint: timer@e4000000 {
>  					      <&cpu6_intc 3>, <&cpu6_intc 7>,
>  					      <&cpu7_intc 3>, <&cpu7_intc 7>;
>  		};
> +
> +		sec_uart1: serial@f0612000 {
> +			compatible = "spacemit,k1-uart", "intel,xscale-uart";
> +			reg = <0x0 0xf0612000 0x0 0x100>;
> +			interrupts = <43>;
> +			clock-frequency = <14857000>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "reserved"; /* for TEE usage */
> +		};
>  	};
>  };
> 
> -- 
> 2.45.2
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 11/11] riscv: dts: spacemit: add uart1 node for K1 SoC
Posted by Yixun Lan 1 year, 7 months ago
On 22:05 Thu 04 Jul     , Jisheng Zhang wrote:
> On Wed, Jul 03, 2024 at 02:55:14PM +0000, Yixun Lan wrote:
> > Devices in 0xf000,0000 - 0xf080,0000 are reserved for TEE purpose,
> > so add uart1 here but mark its status as reserved.
> 
> This patch doesn't deserve a seperate patch, it's better to fold it
> into the dtsi one.

fine, I will address it in next revision

-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55