On Wed, Jul 03, 2024 at 03:34:34PM +0200, Matteo Martelli wrote:
> Add iio driver and DT binding for the Microchip PAC1921 Current/Power
> monitor.
>
> Implemented most of the features with few limitations listed in the
> driver commit message.
>
> Tested with a Pine64 host board connected to a PAC1921 click board [1]
> via I2C. The PAC1921 click board embeds the Microchip PAC1921 device
> and a 10 mOhms shunt resistor. The PAC1921 datasheet is at [2].
>
> [1]: https://www.mikroe.com/pac1921-click
> [2]: https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf
>
> Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Marius, could you take a look at this driver/binding?
> ---
> Matteo Martelli (2):
> dt-bindings: iio: adc: add binding for pac1921
> iio: adc: add support for pac1921
>
> .../ABI/testing/sysfs-bus-iio-adc-pac1921 | 45 +
> .../bindings/iio/adc/microchip,pac1921.yaml | 79 ++
> MAINTAINERS | 7 +
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/pac1921.c | 1033 ++++++++++++++++++++
> 6 files changed, 1175 insertions(+)
> ---
> base-commit: 529d2e1900642eba6df28307e26e19793e227546
> change-id: 20240606-iio-pac1921-77fa0fa3ac11
>
> Best regards,
> --
> Matteo Martelli <matteomartelli3@gmail.com>
>