I2C interface timing registers are configured using config setting
framework. Add reference to I2C config settings.

Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
---
 .../devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml          | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index 424a4fc218b6..2f6f12149876 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -119,6 +119,11 @@ properties:
       - const: rx
       - const: tx
 
+  config-settings:
+    items:
+      - description: phandle to the i2c configuration settings
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml
   - if:
-- 
2.43.2

On Mon, 01 Jul 2024 20:42:23 +0530, Krishna Yarlagadda wrote:
> I2C interface timing registers are configured using config setting
> framework. Add reference to I2C config settings.
> 
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
> ---
>  .../devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml          | 5 +++++
>  1 file changed, 5 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml: config-settings: missing type definition

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240701151231.29425-6-kyarlagadda@nvidia.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.