Add binding for Nuvoton MA35D1 SDHCI controller.

Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com>
---
 .../bindings/mmc/nuvoton,ma35d1-sdhci.yaml    | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/nuvoton,ma35d1-sdhci.yaml

diff --git a/Documentation/devicetree/bindings/mmc/nuvoton,ma35d1-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nuvoton,ma35d1-sdhci.yaml
new file mode 100644
index 000000000000..cf08cdcb58ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/nuvoton,ma35d1-sdhci.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/nuvoton,ma35d1-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 SD/SDIO/MMC Controller
+
+maintainers:
+  - Shan-Chun Hung <shanchun1218@gmail.com>
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,ma35d1-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: state_uhs
+
+  pinctrl-0:
+    description:
+      Should contain default/high speed pin ctrl.
+    maxItems: 1
+
+  pinctrl-1:
+    description:
+      Should contain uhs mode pin ctrl.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  nuvoton,sys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to access GCR (Global Control Register) registers.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - pinctrl-names
+  - pinctrl-0
+  - resets
+  - nuvoton,sys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+    #include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        mmc@40190000 {
+            compatible = "nuvoton,ma35d1-sdhci";
+            reg = <0x0 0x40190000 0x0 0x2000>;
+            interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk SDH1_GATE>;
+            pinctrl-names = "default", "state_uhs";
+            pinctrl-0 = <&pinctrl_sdhci1>;
+            pinctrl-1 = <&pinctrl_sdhci1_uhs>;
+            resets = <&sys MA35D1_RESET_SDH1>;
+            nuvoton,sys = <&sys>;
+            vqmmc-supply = <&sdhci1_vqmmc_regulator>;
+            bus-width = <8>;
+            max-frequency = <200000000>;
+            status = "disabled";
+        };
+    };
--
2.25.1

On 01/07/2024 02:39, Shan-Chun Hung wrote:
> Add binding for Nuvoton MA35D1 SDHCI controller.
> 
> Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com>

You ignored comment third time.

NAK.

<form letter>
This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.
</form letter>


Best regards,
Krzysztof

Dear Krzysztof,

Thanks for your review.

I'm sorry, I just realized I missed an important letter.

I will drop status = "disabled" in the next version.

> On 01/07/2024 02:39, Shan-Chun Hung wrote:
>> Add binding for Nuvoton MA35D1 SDHCI controller.
>>
>> Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com>
> You ignored comment third time.
>
> NAK.
>
> <form letter>
> This is a friendly reminder during the review process.
>
> It seems my or other reviewer's previous comments were not fully
> addressed. Maybe the feedback got lost between the quotes, maybe you
> just forgot to apply it. Please go back to the previous discussion and
> either implement all requested changes or keep discussing them.
>
> Thank you.
> </form letter>
>
>
> Best regards,
> Krzysztof

Best Regards,

Shan-Chun