From: Mithil Bavishi <bavishimithil@gmail.com>

Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well.

This can be included in the board files like twl6030.
Example:
...
&i2c1 {
    twl: twl@48 {
        reg = <0x48>;
        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-controller;
        interrupt-parent = <&gic>;
    };
};

/include/ "twl6032.dtsi"
...

Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
Changelog v2:
- Added nodes for pwm, pwm-led
- Added nodes for regulators - ldoln and ldo2
- Renamed nodes to match compatible names
- Removed regulator properties and voltages, since we do not have a datasheet and relying on downstream values is not always correct, hence let the properties and min/max volatages be defined in the board device trees.

 arch/arm/boot/dts/ti/omap/twl6032.dtsi | 81 ++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi

diff --git a/arch/arm/boot/dts/ti/omap/twl6032.dtsi b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
new file mode 100644
index 000000000..4372ce466
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/twl6032.pdf
+ */
+
+&twl {
+	compatible = "ti,twl6032";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vana: regulator-vana {
+		compatible = "ti,twl6030-vana";
+	};
+
+	vio: regulator-vio {
+		compatible = "ti,twl6032-vio";
+	};
+
+	ldo1: regulator-ldo1 {
+		compatible = "ti,twl6032-ldo1";
+	};
+
+	ldo2: regulator-ldo2 {
+		compatible = "ti,twl6032-ldo2";
+	};
+
+	ldo3: regulator-ldo3 {
+		compatible = "ti,twl6032-ldo3";
+	};
+
+	ldo4: regulator-ldo4 {
+		compatible = "ti,twl6032-ldo4";
+	};
+
+	ldo5: regulator-ldo5 {
+		compatible = "ti,twl6032-ldo5";
+	};
+
+	ldo6: regulator-ldo6 {
+		compatible = "ti,twl6032-ldo6";
+	};
+
+	ldoln: regulator-ldoln {
+		compatible = "ti,twl6032-ldoln";
+	};
+
+	ldousb: regulator-ldousb {
+		compatible = "ti,twl6032-ldousb";
+	};
+
+	smps4: regulator-smps4 {
+		compatible = "ti,twl6032-smps4";
+	};
+
+	gpadc: gpadc {
+		compatible = "ti,twl6032-gpadc";
+		interrupts = <3>;
+		io-channel-cells = <1>;
+	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
+
+	twl_pwm: pwm {
+		compatible = "ti,twl6030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		compatible = "ti,twl6030-pwmled";
+		#pwm-cells = <2>;
+	};
+};
-- 
2.34.1

> Well, no, the file is not used at the moment, I do not think it makes sense to have it in without an actual in-tree user.

So, I am planning to merge espresso dts (https://gitlab.postmarketos.org/postmarketOS/pmaports/-/blob/master/device/community/linux-postmarketos-omap/0002-arm-dts-Add-common-dtsi-for-espresso.patch?ref_type=heads) once this gets merged, plus it can be later used on epson-embt2ws as well.

Best Regards,
Mithil

Hi Mithil,

Am Tue, 29 Oct 2024 20:30:14 +0000
schrieb MightyM17 <bavishimithil@gmail.com>:

> > Well, no, the file is not used at the moment, I do not think it
> > makes sense to have it in without an actual in-tree user.  
> 
> So, I am planning to merge espresso dts
> (https://gitlab.postmarketos.org/postmarketOS/pmaports/-/blob/master/device/community/linux-postmarketos-omap/0002-arm-dts-Add-common-dtsi-for-espresso.patch?ref_type=heads)
> once this gets merged, plus it can be later used on epson-embt2ws as
> well.
> 
well, lets merge the stuff together with a dts as an actual user, so
submit a full patch set with
- binding patch for board compatible
- dtsi files
- at least one dts file

having a short look at the patch you linked, you still have some
underscores in node names.

Regards,
Andreas

Am Wed, 26 Jun 2024 15:20:56 +0530
schrieb Mighty <bavishimithil@gmail.com>:

> From: Mithil Bavishi <bavishimithil@gmail.com>
> 
> Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
> has driver support with TWL6030 (Phoenix) since both of them are so
> similar, some nodes can be reused from TWL6030 as well.
> 
> This can be included in the board files like twl6030.
> Example:
> ...
> &i2c1 {
>     twl: twl@48 {
>         reg = <0x48>;
>         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>         interrupt-controller;
>         interrupt-parent = <&gic>;
>     };
> };
> 
> /include/ "twl6032.dtsi"
> ...
> 
> Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc.
> 
Well, no, the file is not used at the moment, I do not think it makes
sense to have it in without an actual in-tree user.

Regards,
Andreas

Hello, is there anything blocking this? Previous problems have been mentioned in this v2 patch, any further reviews?

Best Regards,
Mithil