drivers/tty/serial/8250/8250_omap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
As per Errata i2310[0], Erroneous timeout can be triggered,
if this Erroneous interrupt is not cleared then it may leads
to storm of interrupts.
This patch adding fifo empty check before applying errata.
[0] https://www.ti.com/lit/pdf/sprz536 page 23
Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
This is check is added on top of errata implementation v3 patch
https://lore.kernel.org/all/20240619105903.165434-1-u-kumar1@ti.com/
drivers/tty/serial/8250/8250_omap.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index ddac0a13cf84..1af9aed99c65 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -672,7 +672,8 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
* https://www.ti.com/lit/pdf/sprz536
*/
if (priv->habit & UART_RX_TIMEOUT_QUIRK &&
- (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT) {
+ (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT &&
+ serial_port_in(port, UART_OMAP_RX_LVL) == 0) {
unsigned char efr2, timeout_h, timeout_l;
efr2 = serial_in(up, UART_OMAP_EFR2);
--
2.34.1
On Tue, Jun 25, 2024 at 10:43:38AM +0530, Udit Kumar wrote:
> As per Errata i2310[0], Erroneous timeout can be triggered,
> if this Erroneous interrupt is not cleared then it may leads
> to storm of interrupts.
>
> This patch adding fifo empty check before applying errata.
>
> [0] https://www.ti.com/lit/pdf/sprz536 page 23
>
> Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs")
> Cc: stable@vger.kernel.org
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---
> This is check is added on top of errata implementation v3 patch
> https://lore.kernel.org/all/20240619105903.165434-1-u-kumar1@ti.com/
The subject, changelog text, reported-by, and fixes: tags all need to be
changed to be correct as what you have above is not right at all.
thanks,
greg k-h
© 2016 - 2025 Red Hat, Inc.