The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from
sam9x60 SoC DT.
Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string
to find the number of active GPIO banks and identify the pinmux nodes.It
should used as a constant across all DT for GPIO node banks that uses PIO3
based pinctrl driver
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
arch/arm/boot/dts/microchip/sam9x60.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 797855e78058..db2ddff872d2 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -1236,7 +1236,7 @@ pinctrl: pinctrl@fffff400 {
>;
pioA: gpio@fffff400 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
@@ -1247,7 +1247,7 @@ pioA: gpio@fffff400 {
};
pioB: gpio@fffff600 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
@@ -1259,7 +1259,7 @@ pioB: gpio@fffff600 {
};
pioC: gpio@fffff800 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
@@ -1270,7 +1270,7 @@ pioC: gpio@fffff800 {
};
pioD: gpio@fffffa00 {
- compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
--
2.25.1