In the liointc hardware, there are different ISRs (i.e. Interrupt Status
Registers) for different cores. We always use core#0's ISR before but it
has no problem, this is because the interrupts are routed to core#0 by
default. If we change the routing (which can be done by changing firmware
configuration) then we will lose interrupts while CPU hotplugging, so we
should set correct ISRs for different cores.

Cc: <stable@vger.kernel.org>
Co-developed-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
V2: Update commit messages.

 drivers/irqchip/irq-loongson-liointc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index e4b33aed1c97..7c4fe7ab4b83 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -28,7 +28,7 @@
 
 #define LIOINTC_INTC_CHIP_START	0x20
 
-#define LIOINTC_REG_INTC_STATUS	(LIOINTC_INTC_CHIP_START + 0x20)
+#define LIOINTC_REG_INTC_STATUS(core)	(LIOINTC_INTC_CHIP_START + 0x20 + (core) * 8)
 #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
 #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
 #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
@@ -217,7 +217,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
 		goto out_free_priv;
 
 	for (i = 0; i < LIOINTC_NUM_CORES; i++)
-		priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS;
+		priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS(i);
 
 	for (i = 0; i < LIOINTC_NUM_PARENT; i++)
 		priv->handler[i].parent_int_map = parent_int_map[i];
-- 
2.43.0

The following commit has been merged into the irq/urgent branch of tip:

Commit-ID:     a9c3ee5d0fdb069b54902300df6ac822027f3b0a
Gitweb:        https://git.kernel.org/tip/a9c3ee5d0fdb069b54902300df6ac822027f3b0a
Author:        Huacai Chen <chenhuacai@loongson.cn>
AuthorDate:    Sat, 22 Jun 2024 12:33:38 +08:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Sun, 23 Jun 2024 17:09:26 +02:00

irqchip/loongson-liointc: Set different ISRs for different cores

The liointc hardware provides separate Interrupt Status Registers (ISR) for
each core. The current code uses always the ISR of core #0, which works
during boot because by default all interrupts are routed to core #0.

When the interrupt routing changes in the firmware configuration then this
causes interrupts to be lost because they are not configured in the
corresponding core.

Use the core index to access the correct ISR instead of a hardcoded 0.

[ tglx: Massaged changelog ]

Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Co-developed-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn

---
 drivers/irqchip/irq-loongson-liointc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index e4b33ae..7c4fe7a 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -28,7 +28,7 @@
 
 #define LIOINTC_INTC_CHIP_START	0x20
 
-#define LIOINTC_REG_INTC_STATUS	(LIOINTC_INTC_CHIP_START + 0x20)
+#define LIOINTC_REG_INTC_STATUS(core)	(LIOINTC_INTC_CHIP_START + 0x20 + (core) * 8)
 #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
 #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
 #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
@@ -217,7 +217,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
 		goto out_free_priv;
 
 	for (i = 0; i < LIOINTC_NUM_CORES; i++)
-		priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS;
+		priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS(i);
 
 	for (i = 0; i < LIOINTC_NUM_PARENT; i++)
 		priv->handler[i].parent_int_map = parent_int_map[i];