WiFi modules often require 32kHz clock to function. Add support to
enable the clock to PCIe driver.

Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c    | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 06698a714b523..f241e1757d7e3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2014 Broadcom Corporation
  */
 
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/firmware.h>
@@ -2411,6 +2412,7 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct brcmf_pciedev *pcie_bus_dev;
 	struct brcmf_core *core;
 	struct brcmf_bus *bus;
+	struct clk *clk;
 
 	if (!id) {
 		id = pci_match_id(brcmf_pcie_devid_table, pdev);
@@ -2422,6 +2424,14 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
 
+	clk = devm_clk_get_optional_enabled(&pdev->dev, "32k");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	if (clk) {
+		dev_info(&pdev->dev, "enabling 32kHz clock\n");
+		clk_set_rate(clk, 32768);
+	}
+
 	ret = -ENOMEM;
 	devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
 	if (devinfo == NULL)
-- 
2.34.1

On 20/06/2024 04:00, Jacobe Zang wrote:
> WiFi modules often require 32kHz clock to function. Add support to
> enable the clock to PCIe driver.
> 
> Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
> ---
>  .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c    | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> index 06698a714b523..f241e1757d7e3 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2014 Broadcom Corporation
>   */
>  
> +#include <linux/clk.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/firmware.h>
> @@ -2411,6 +2412,7 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	struct brcmf_pciedev *pcie_bus_dev;
>  	struct brcmf_core *core;
>  	struct brcmf_bus *bus;
> +	struct clk *clk;
>  
>  	if (!id) {
>  		id = pci_match_id(brcmf_pcie_devid_table, pdev);
> @@ -2422,6 +2424,14 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  
>  	brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
>  
> +	clk = devm_clk_get_optional_enabled(&pdev->dev, "32k");

Where is the binding for this?

> +	if (IS_ERR(clk))
> +		return PTR_ERR(clk);
> +	if (clk) {
> +		dev_info(&pdev->dev, "enabling 32kHz clock\n");

Drop



Best regards,
Krzysztof

Hi,

On Thu, Jun 20, 2024 at 10:00:14AM GMT, Jacobe Zang wrote:
> WiFi modules often require 32kHz clock to function. Add support to
> enable the clock to PCIe driver.

There's also this approach https://lore.kernel.org/lkml/20240117160748.37682-1-brgl@bgdev.pl/

> Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
> ---
>  .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c    | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> index 06698a714b523..f241e1757d7e3 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2014 Broadcom Corporation
>   */
>  
> +#include <linux/clk.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/firmware.h>
> @@ -2411,6 +2412,7 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	struct brcmf_pciedev *pcie_bus_dev;
>  	struct brcmf_core *core;
>  	struct brcmf_bus *bus;
> +	struct clk *clk;
>  
>  	if (!id) {
>  		id = pci_match_id(brcmf_pcie_devid_table, pdev);
> @@ -2422,6 +2424,14 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  
>  	brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
>  
> +	clk = devm_clk_get_optional_enabled(&pdev->dev, "32k");

If you do this, you need to update the DT bindings. Current ones don't have 32k
clock.

> +	if (IS_ERR(clk))
> +		return PTR_ERR(clk);
> +	if (clk) {
> +		dev_info(&pdev->dev, "enabling 32kHz clock\n");

The driver has its own debug logging infrastructure (brcmf_dbg).

Kind regards,
	o.

> +		clk_set_rate(clk, 32768);
> +	}
> +
>  	ret = -ENOMEM;
>  	devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
>  	if (devinfo == NULL)
> -- 
> 2.34.1
>