Switch from one sub-node per functionality in the system-controller to a
single node representing the entire OLB instance. This is the
recommended approach for controllers handling many different
functionalities; it is a single controller and should be represented by
a single devicetree node.

The reset bindings is removed and all properties will be described by:
soc/mobileye/mobileye,eyeq5-olb.yaml

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 .../bindings/reset/mobileye,eyeq5-reset.yaml       | 43 ----------------------
 1 file changed, 43 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml b/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
deleted file mode 100644
index 062b4518347b..000000000000
--- a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mobileye EyeQ5 reset controller
-
-description:
-  The EyeQ5 reset driver handles three reset domains. Its registers live in a
-  shared region called OLB.
-
-maintainers:
-  - Grégory Clement <gregory.clement@bootlin.com>
-  - Théo Lebrun <theo.lebrun@bootlin.com>
-  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
-
-properties:
-  compatible:
-    const: mobileye,eyeq5-reset
-
-  reg:
-    maxItems: 3
-
-  reg-names:
-    items:
-      - const: d0
-      - const: d1
-      - const: d2
-
-  "#reset-cells":
-    const: 2
-    description:
-      The first cell is the domain (0 to 2 inclusive) and the second one is the
-      reset index inside that domain.
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - "#reset-cells"
-
-additionalProperties: false

-- 
2.45.2

On Thu, 20 Jun 2024 19:30:54 +0200, Théo Lebrun wrote:
> Switch from one sub-node per functionality in the system-controller to a
> single node representing the entire OLB instance. This is the
> recommended approach for controllers handling many different
> functionalities; it is a single controller and should be represented by
> a single devicetree node.
> 
> The reset bindings is removed and all properties will be described by:
> soc/mobileye/mobileye,eyeq5-olb.yaml
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  .../bindings/reset/mobileye,eyeq5-reset.yaml       | 43 ----------------------
>  1 file changed, 43 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

On Thu, 20 Jun 2024 19:30:54 +0200, Théo Lebrun wrote:
> Switch from one sub-node per functionality in the system-controller to a
> single node representing the entire OLB instance. This is the
> recommended approach for controllers handling many different
> functionalities; it is a single controller and should be represented by
> a single devicetree node.
> 
> The reset bindings is removed and all properties will be described by:
> soc/mobileye/mobileye,eyeq5-olb.yaml
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  .../bindings/reset/mobileye,eyeq5-reset.yaml       | 43 ----------------------
>  1 file changed, 43 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a']
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: /example-0/remoteproc@cd00000: failed to match any schema with compatible: ['qcom,ipq8074-wcss-pil']
Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart']
Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy']
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/stm32/st,mlahb.example.dtb: ahb@38000000: Unevaluated properties are not allowed ('reg' was unexpected)
	from schema $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240620-mbly-olb-v3-2-5f29f8ca289c@bootlin.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

On Thu, Jun 20, 2024 at 12:26:57PM -0600, Rob Herring (Arm) wrote:
> 
> On Thu, 20 Jun 2024 19:30:54 +0200, Théo Lebrun wrote:
> > Switch from one sub-node per functionality in the system-controller to a
> > single node representing the entire OLB instance. This is the
> > recommended approach for controllers handling many different
> > functionalities; it is a single controller and should be represented by
> > a single devicetree node.
> > 
> > The reset bindings is removed and all properties will be described by:
> > soc/mobileye/mobileye,eyeq5-olb.yaml
> > 
> > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> > ---
> >  .../bindings/reset/mobileye,eyeq5-reset.yaml       | 43 ----------------------
> >  1 file changed, 43 deletions(-)
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a']
> Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: /example-0/remoteproc@cd00000: failed to match any schema with compatible: ['qcom,ipq8074-wcss-pil']
> Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
> Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd']
> Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart']
> Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy']
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/stm32/st,mlahb.example.dtb: ahb@38000000: Unevaluated properties are not allowed ('reg' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#

Not sure what happened here, but this can be ignored.

Rob