1. Patchew
  2. linux
  3. [PATCH 0/3] Enable audio for J784S4-EVM platform
  4. View patch

[PATCH 1/3] arm64: dts: ti: k3-j784s4-main: Add McASP nodes

Jayesh Choudhary posted 3 patches 1 year, 7 months ago
There is a newer version of this series
[PATCH 1/3] arm64: dts: ti: k3-j784s4-main: Add McASP nodes
Posted by Jayesh Choudhary 1 year, 7 months ago 
Add McASP 0-4 instances and keep them disabled as several required
properties are missing as they are board specific.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 80 ++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index fd3d3344efbe..96085dc7bc18 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -2617,4 +2617,84 @@ dss_ports: ports {
 			 */
 		};
 	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+		      <0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 265 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 265 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+		      <0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 266 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+		      <0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 267 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b30000 0x0 0x2000>,
+		      <0x0 0x02b38000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 268 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b40000 0x0 0x2000>,
+		      <0x0 0x02b48000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 269 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
-- 
2.25.1
Re: [PATCH 1/3] arm64: dts: ti: k3-j784s4-main: Add McASP nodes
Posted by Vignesh Raghavendra 1 year, 7 months ago 

On 19/06/24 15:22, Jayesh Choudhary wrote:
> Add McASP 0-4 instances and keep them disabled as several required
> properties are missing as they are board specific.
> 
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 80 ++++++++++++++++++++++
>  1 file changed, 80 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> index fd3d3344efbe..96085dc7bc18 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> @@ -2617,4 +2617,84 @@ dss_ports: ports {
>  			 */
>  		};
>  	};
> +
> +	mcasp0: mcasp@2b00000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x0 0x02b00000 0x0 0x2000>,
> +		      <0x0 0x02b08000 0x0 0x1000>;

			^^ Should be 0x00 (elsewhere as well) to be inline with rest of the file


> +		reg-names = "mpu","dat";
> +		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
> +		dma-names = "tx", "rx";
> +		clocks = <&k3_clks 265 1>;
> +		clock-names = "fck";
> +		power-domains = <&k3_pds 265 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
> +
> +	mcasp1: mcasp@2b10000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x0 0x02b10000 0x0 0x2000>,
> +		      <0x0 0x02b18000 0x0 0x1000>;
> +		reg-names = "mpu","dat";
> +		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
> +		dma-names = "tx", "rx";
> +		clocks = <&k3_clks 266 1>;
> +		clock-names = "fck";
> +		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
> +
> +	mcasp2: mcasp@2b20000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x0 0x02b20000 0x0 0x2000>,
> +		      <0x0 0x02b28000 0x0 0x1000>;
> +		reg-names = "mpu","dat";
> +		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
> +		dma-names = "tx", "rx";
> +		clocks = <&k3_clks 267 1>;
> +		clock-names = "fck";
> +		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
> +
> +	mcasp3: mcasp@2b30000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x0 0x02b30000 0x0 0x2000>,
> +		      <0x0 0x02b38000 0x0 0x1000>;
> +		reg-names = "mpu","dat";
> +		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
> +		dma-names = "tx", "rx";
> +		clocks = <&k3_clks 268 1>;
> +		clock-names = "fck";
> +		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
> +
> +	mcasp4: mcasp@2b40000 {
> +		compatible = "ti,am33xx-mcasp-audio";
> +		reg = <0x0 0x02b40000 0x0 0x2000>,
> +		      <0x0 0x02b48000 0x0 0x1000>;
> +		reg-names = "mpu","dat";
> +		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tx", "rx";
> +		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
> +		dma-names = "tx", "rx";
> +		clocks = <&k3_clks 269 1>;
> +		clock-names = "fck";
> +		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +	};
>  };

-- 
Regards
Vignesh
Re: [PATCH 1/3] arm64: dts: ti: k3-j784s4-main: Add McASP nodes
Posted by Jayesh Choudhary 1 year, 7 months ago 
Hello Vignesh!

On 25/06/24 14:01, Vignesh Raghavendra wrote:
> 
> 
> On 19/06/24 15:22, Jayesh Choudhary wrote:
>> Add McASP 0-4 instances and keep them disabled as several required
>> properties are missing as they are board specific.
>>
>> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 80 ++++++++++++++++++++++
>>   1 file changed, 80 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> index fd3d3344efbe..96085dc7bc18 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> @@ -2617,4 +2617,84 @@ dss_ports: ports {
>>   			 */
>>   		};
>>   	};
>> +
>> +	mcasp0: mcasp@2b00000 {
>> +		compatible = "ti,am33xx-mcasp-audio";
>> +		reg = <0x0 0x02b00000 0x0 0x2000>,
>> +		      <0x0 0x02b08000 0x0 0x1000>;
> 
> 			^^ Should be 0x00 (elsewhere as well) to be inline with rest of the file

Will fix the padding.

Warm Regards,
-Jayesh

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.