arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
Update the usb interrupts properties to fix the following
bindings check errors:
usb@a6f8800: interrupt-names:0: 'pwr_event' was expected
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:1: 'hs_phy_irq' was expected
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq', 'dm_hs_phy_irq', 'dp_hs_phy_irq'] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
Fixes: dd1bd5bf7420 ("arm64: dts: qcom: qdu1000: Add USB3 and PHY support")
Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406171241.YKuCm3SC-lkp@intel.com/
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 7a77f7a55498..5759b8fe55fb 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -976,13 +976,15 @@ usb_1: usb@a6f8800 {
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 8 IRQ_TYPE_EDGE_RISING>,
- <&pdc 9 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "hs_phy_irq",
- "ss_phy_irq",
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
"dp_hs_phy_irq",
- "dm_hs_phy_irq";
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
required-opps = <&rpmhpd_opp_nom>;
--
2.42.0
On Mon, 17 Jun 2024 17:26:24 +0530, Komal Bajaj wrote:
> Update the usb interrupts properties to fix the following
> bindings check errors:
> usb@a6f8800: interrupt-names:0: 'pwr_event' was expected
> from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
> usb@a6f8800: interrupt-names:1: 'hs_phy_irq' was expected
> from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
> usb@a6f8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq', 'dm_hs_phy_irq', 'dp_hs_phy_irq'] is too short
> from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: qdu1000: fix usb interrupts properties
commit: 38b55ddb4a9f364b68cb1db174cadfae7cf4696e
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
On 6/17/24 13:56, Komal Bajaj wrote:
> Update the usb interrupts properties to fix the following
> bindings check errors:
> usb@a6f8800: interrupt-names:0: 'pwr_event' was expected
> from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
> usb@a6f8800: interrupt-names:1: 'hs_phy_irq' was expected
> from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
> usb@a6f8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq', 'dm_hs_phy_irq', 'dp_hs_phy_irq'] is too short
> from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>
> Fixes: dd1bd5bf7420 ("arm64: dts: qcom: qdu1000: Add USB3 and PHY support")
> Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202406171241.YKuCm3SC-lkp@intel.com/
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
© 2016 - 2026 Red Hat, Inc.