This patch series adds 10G-QXGMII mode for PHY driver. The patch
series is split from the QCA8084 PHY driver patch series below.
https://lore.kernel.org/all/20231215074005.26976-1-quic_luoj@quicinc.com/
 
Per Andrew Lunn’s advice, submitting this patch series for acceptance
as they already include the necessary 'Reviewed-by:' tags. This way,
they need not wait for QCA8084 series patches to conclude review.

Changes in v2:
	* remove PHY_INTERFACE_MODE_10G_QXGMII from workaround of
	  validation in the phylink_validate_phy. 10G_QXGMII will
	  be set into phy->possible_interfaces in its .config_init
	  method of PHY driver that supports it. 

Vladimir Oltean (2):
  net: phy: introduce core support for phy-mode = "10g-qxgmii"
  dt-bindings: net: ethernet-controller: add 10g-qxgmii mode

 .../devicetree/bindings/net/ethernet-controller.yaml     | 1 +
 Documentation/networking/phy.rst                         | 6 ++++++
 drivers/net/phy/phy-core.c                               | 1 +
 drivers/net/phy/phylink.c                                | 9 ++++++++-
 include/linux/phy.h                                      | 4 ++++
 include/linux/phylink.h                                  | 1 +
 6 files changed, 21 insertions(+), 1 deletion(-)


base-commit: 934c29999b57b835d65442da6f741d5e27f3b584
-- 
2.34.1