arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts | 11 ++++++++--- arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts | 11 ++++++++--- arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts | 11 ++++++++--- 3 files changed, 24 insertions(+), 9 deletions(-)
GPIOs 34 and 35 on MT8195 are of type MTK_PULL_PU_PD_RSEL_TYPE, meaning
not only can they be configured as pull-up or pull-down, but the pull
resistance can also be configured.
The current bias setting however doesn't specify a resistance value,
resulting on the following errors:
mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 34 (GPIO34)
mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 35 (GPIO35)
Specify the pull resistance for those GPIOs to fix the errors.
Fixes: 5bf7dabe40f2 ("arm64: dts: mediatek: cherry: Document gpios and add default pin config")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts | 11 ++++++++---
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts | 11 ++++++++---
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts | 11 ++++++++---
3 files changed, 24 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
index 88123842c818..49664de99b88 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
@@ -82,12 +82,17 @@ &pio_default {
pins-low-power-hdmi-disable {
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
<PINMUX_GPIO32__FUNC_GPIO32>,
- <PINMUX_GPIO33__FUNC_GPIO33>,
- <PINMUX_GPIO34__FUNC_GPIO34>,
- <PINMUX_GPIO35__FUNC_GPIO35>;
+ <PINMUX_GPIO33__FUNC_GPIO33>;
input-enable;
bias-pull-down;
};
+
+ pins-low-power-hdmi-rsel-disable {
+ pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down = <75000>;
+ };
};
&sound {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2fe20e0dad83..2d6522c144b7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -19,13 +19,18 @@ &pio_default {
pins-low-power-hdmi-disable {
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
<PINMUX_GPIO32__FUNC_GPIO32>,
- <PINMUX_GPIO33__FUNC_GPIO33>,
- <PINMUX_GPIO34__FUNC_GPIO34>,
- <PINMUX_GPIO35__FUNC_GPIO35>;
+ <PINMUX_GPIO33__FUNC_GPIO33>;
input-enable;
bias-pull-down;
};
+ pins-low-power-hdmi-rsel-disable {
+ pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down = <75000>;
+ };
+
pins-low-power-pcie0-disable {
pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
<PINMUX_GPIO20__FUNC_GPIO20>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index dd294ca98194..9049d362a5e0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -20,13 +20,18 @@ &pio_default {
pins-low-power-hdmi-disable {
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
<PINMUX_GPIO32__FUNC_GPIO32>,
- <PINMUX_GPIO33__FUNC_GPIO33>,
- <PINMUX_GPIO34__FUNC_GPIO34>,
- <PINMUX_GPIO35__FUNC_GPIO35>;
+ <PINMUX_GPIO33__FUNC_GPIO33>;
input-enable;
bias-pull-down;
};
+ pins-low-power-hdmi-rsel-disable {
+ pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+ <PINMUX_GPIO35__FUNC_GPIO35>;
+ input-enable;
+ bias-pull-down = <75000>;
+ };
+
pins-low-power-pcie0-disable {
pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
<PINMUX_GPIO20__FUNC_GPIO20>,
---
base-commit: 0e1980c40b6edfa68b6acf926bab22448a6e40c9
change-id: 20240531-tomato-rsel-gpio34-35-fix-185acda05c17
Best regards,
--
Nícolas F. R. A. Prado <nfraprado@collabora.com>
On Fri, 31 May 2024 17:51:09 -0400, Nícolas F. R. A. Prado wrote: > GPIOs 34 and 35 on MT8195 are of type MTK_PULL_PU_PD_RSEL_TYPE, meaning > not only can they be configured as pull-up or pull-down, but the pull > resistance can also be configured. > > The current bias setting however doesn't specify a resistance value, > resulting on the following errors: > > [...] Applied to v6.11-next/dts64, thanks! [1/1] arm64: dts: mediatek: cherry: Specify pull resistance for RSEL GPIOs commit: d92fd0cc01b31d59a0e95f44e3f08921fd74fb87 Cheers, Angelo
On Fri, May 31, 2024 at 05:51:09PM -0400, Nícolas F. R. A. Prado wrote: > GPIOs 34 and 35 on MT8195 are of type MTK_PULL_PU_PD_RSEL_TYPE, meaning > not only can they be configured as pull-up or pull-down, but the pull > resistance can also be configured. > > The current bias setting however doesn't specify a resistance value, > resulting on the following errors: > > mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 34 (GPIO34) > mt8195-pinctrl 10005000.pinctrl: Not support rsel value 1 Ohm for pin = 35 (GPIO35) > > Specify the pull resistance for those GPIOs to fix the errors. > > Fixes: 5bf7dabe40f2 ("arm64: dts: mediatek: cherry: Document gpios and add default pin config") > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Hi Angelo, it seems this patch fell through the cracks. Do you want me to rebase & resend it? Same question for this patch: https://lore.kernel.org/all/20240606-mt8195-dma-scp-node-err-v2-1-e14702e9d3f2@collabora.com/ Thanks, Nícolas
© 2016 - 2024 Red Hat, Inc.