Current ionic devices only support 52 internal physical address
lines. This is sufficient for x86_64 systems which have similar
limitations but does not apply to all other architectures,
notably IBM POWER (ppc64). To ensure that MSI/MSI-X vectors are
not set outside the physical address limits of the NIC, set the
recently added no_64bit_msi value of the pci_dev structure
during device probe.

Signed-off-by: David Christensen <drc@linux.ibm.com>
---
 drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
index 6ba8d4aca0a0..1e7f507f461f 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
@@ -326,6 +326,10 @@ static int ionic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out;
 	}
 
+	/* Ensure MSI/MSI-X interrupts lie within addressable physical memory */
+	if (IONIC_ADDR_LEN < 64)
+		pdev->no_64bit_msi = 1;
+
 	err = ionic_setup_one(ionic);
 	if (err)
 		goto err_out;
-- 
2.43.0

On 5/30/2024 2:40 PM, David Christensen wrote:
> 
> Current ionic devices only support 52 internal physical address
> lines. This is sufficient for x86_64 systems which have similar
> limitations but does not apply to all other architectures,
> notably IBM POWER (ppc64). To ensure that MSI/MSI-X vectors are
> not set outside the physical address limits of the NIC, set the
> recently added no_64bit_msi value of the pci_dev structure
> during device probe.
> 
> Signed-off-by: David Christensen <drc@linux.ibm.com>
> ---
>   drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
> index 6ba8d4aca0a0..1e7f507f461f 100644
> --- a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
> +++ b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
> @@ -326,6 +326,10 @@ static int ionic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>                  goto err_out;
>          }
> 
> +       /* Ensure MSI/MSI-X interrupts lie within addressable physical memory */
> +       if (IONIC_ADDR_LEN < 64)
> +               pdev->no_64bit_msi = 1;
> +

Thanks, David, for the reminder that we have something like this in our 
out-of-tree driver.  I'm far from being a DMA expert, but this seems 
limiting for those architectures that don't need it, and I would have 
thought that setting the dma mask would already be the way of telling 
the system what our limitation was so there wouldn't be this problem. 
(I'm sure someone will point out the error in my thinking...)

Perhaps to solve your problem with less limitation on others we could do 
something like:

#ifdef CONFIG_PPC64
        pdev->no_64bit_msi = 1;
#endif

Thanks,
sln

>          err = ionic_setup_one(ionic);
>          if (err)
>                  goto err_out;
> --
> 2.43.0
>

Current ionic devices only support 52 internal physical address
lines. This is sufficient for x86_64 systems which have similar
limitations but does not apply to all other architectures,
notably IBM POWER (ppc64). To ensure that MSI/MSI-X vectors are
not set outside the physical address limits of the NIC, set the
no_64bit_msi value of the pci_dev structure during device probe.

Signed-off-by: David Christensen <drc@linux.ibm.com>
---
v2: Limit change to ppc64 systems as suggested
---
 drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
index 6ba8d4aca0a0..a7146d50f814 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
@@ -326,6 +326,11 @@ static int ionic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out;
 	}
 
+#ifdef CONFIG_PPC64
+	/* Ensure MSI/MSI-X interrupts lie within addressable physical memory */
+	pdev->no_64bit_msi = 1;
+#endif
+
 	err = ionic_setup_one(ionic);
 	if (err)
 		goto err_out;
-- 
2.43.0

On 6/3/2024 2:27 PM, David Christensen wrote:
> 
> Current ionic devices only support 52 internal physical address
> lines. This is sufficient for x86_64 systems which have similar
> limitations but does not apply to all other architectures,
> notably IBM POWER (ppc64). To ensure that MSI/MSI-X vectors are
> not set outside the physical address limits of the NIC, set the
> no_64bit_msi value of the pci_dev structure during device probe.
> 
> Signed-off-by: David Christensen <drc@linux.ibm.com>
> ---
> v2: Limit change to ppc64 systems as suggested
> ---

Works for me, thanks!
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>

>   drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
> index 6ba8d4aca0a0..a7146d50f814 100644
> --- a/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
> +++ b/drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
> @@ -326,6 +326,11 @@ static int ionic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>                  goto err_out;
>          }
> 
> +#ifdef CONFIG_PPC64
> +       /* Ensure MSI/MSI-X interrupts lie within addressable physical memory */
> +       pdev->no_64bit_msi = 1;
> +#endif
> +
>          err = ionic_setup_one(ionic);
>          if (err)
>                  goto err_out;
> --
> 2.43.0
>