Enabled ASD/ADD configuration for LAN7801 in the absence of EEPROM.
After the lite reset these contents go back to defaults where ASD/
ADD is disabled. The check is already available for LAN7800.

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
---
 drivers/net/usb/lan78xx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 7ac540cc3686..62dbfff8dad4 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3034,8 +3034,11 @@ static int lan78xx_reset(struct lan78xx_net *dev)
 		return ret;
 
 	/* LAN7801 only has RGMII mode */
-	if (dev->chipid == ID_REV_CHIP_ID_7801_)
+	if (dev->chipid == ID_REV_CHIP_ID_7801_) {
 		buf &= ~MAC_CR_GMII_EN_;
+		/* Enable Auto Duplex and Auto speed */
+		buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
+	}
 
 	if (dev->chipid == ID_REV_CHIP_ID_7800_ ||
 	    dev->chipid == ID_REV_CHIP_ID_7850_) {
-- 
2.25.1