On 5/28/24 3:20 PM, Tony Luck wrote:
> With Sub-NUMA Cluster mode enabled the scope of monitoring resources is
> per-NODE instead of per-L3 cache. Suffixes of directories with "L3" in
> their name refer to Sub-NUMA nodes instead of L3 cache ids.
(insert feedback from v18)
>
> Users should be aware that SNC mode also affects the amount of L3 cache
> available for allocation within each SNC node.
>
> Signed-off-by: Tony Luck <tony.luck@intel.com>
> ---
> Documentation/arch/x86/resctrl.rst | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
> index 627e23869bca..401f6bfb4a3c 100644
> --- a/Documentation/arch/x86/resctrl.rst
> +++ b/Documentation/arch/x86/resctrl.rst
> @@ -375,6 +375,10 @@ When monitoring is enabled all MON groups will also contain:
> all tasks in the group. In CTRL_MON groups these files provide
> the sum for all tasks in the CTRL_MON group and all tasks in
> MON groups. Please see example section for more details on usage.
> + On systems with Sub-NUMA (SNC) cluster enabled there are extra
(insert feedback from v18)
> + directories for each node (located within the "mon_L3_XX" directory
> + for the L3 cache they occupy). These are named "mon_sub_L3_YY"
> + where "YY" is the node number.
>
> "mon_hw_id":
> Available only with debug option. The identifier used by hardware
> @@ -484,6 +488,19 @@ if non-contiguous 1s value is supported. On a system with a 20-bit mask
> each bit represents 5% of the capacity of the cache. You could partition
> the cache into four equal parts with masks: 0x1f, 0x3e0, 0x7c00, 0xf8000.
>
> +Notes on Sub-NUMA Cluster mode
> +==============================
> +When SNC mode is enabled, Linux may load balance tasks between Sub-NUMA
> +nodes much more readily than between regular NUMA nodes since the CPUs
> +on Sub-NUMA nodes share the same L3 cache and the system may report
> +the NUMA distance between Sub-NUMA nodes with a lower value than used
> +for regular NUMA nodes.
> +The top-level monitoring files in each "mon_L3_XX" directory provide
> +the sum of data across all SNC nodes sharing an L3 cache instance.
> +Users who bind tasks to the CPUs of a specific Sub-NUMA node can read
> +the "llc_occupancy", "mbm_total_bytes", and "mbm_local_bytes" in the
> +"mon_sub_L3_YY" directories to get node local data.
> +
> Memory bandwidth Allocation and monitoring
> ==========================================
>