From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>

Add missing descriptions for clause 33 options and return values for
the show-pse and set-pse commands.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
 ethtool.8.in | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/ethtool.8.in b/ethtool.8.in
index 5924b8d..264df74 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -536,6 +536,8 @@ ethtool \- query or control network driver and hardware settings
 .I devname
 .RB [ podl\-pse\-admin\-control
 .BR enable | disable ]
+.RB [ c33\-pse\-admin\-control
+.BR enable | disable ]
 .
 .\" Adjust lines (i.e. full justification) and hyphenate.
 .ad
@@ -1756,6 +1758,21 @@ status depend on internal PSE state machine and automatic PD classification
 support. It corresponds to IEEE 802.3-2018 30.15.1.1.3
 (aPoDLPSEPowerDetectionStatus) with potential values being
 .B disabled, searching, delivering power, sleep, idle, error
+.TP
+.B c33-pse-admin-state
+This attribute indicates the operational status of c33 PSE functions, which
+can be modified using the
+.B c33-pse-admin-control
+parameter. It corresponds to IEEE 802.3-2022 30.9.1.1.2 (aPSEAdminState),
+with potential values being
+.B enabled, disabled
+.TP
+.B c33-pse-power-detection-status
+This attribute indicates the power detection status of the c33 PSE. The
+status depend on internal PSE state machine and automatic PD classification
+support. It corresponds to IEEE 802.3-2022 30.9.1.1.5
+(aPSEPowerDetectionStatus) with potential values being
+.B disabled, searching, delivering power, test, fault, other fault
 .RE
 
 .RE
@@ -1767,6 +1784,10 @@ Set Power Sourcing Equipment (PSE) parameters.
 .A2 podl-pse-admin-control \ enable disable
 This parameter manages PoDL PSE Admin operations in accordance with the IEEE
 802.3-2018 30.15.1.2.1 (acPoDLPSEAdminControl) specification.
+.TP
+.A2 c33-pse-admin-control \ enable disable
+This parameter manages c33 PSE Admin operations in accordance with the IEEE
+802.3-2022 30.9.1.2.1 (acPSEAdminControl) specification.
 
 .SH BUGS
 Not supported (in part or whole) on all network drivers.

---
base-commit: edf00bab748b4e2d9620a106d84b03fdfb4d44da
change-id: 20240520-fix_missing_doc-6a0efe51549c

Best regards,
-- 
K�ry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

On Mon, 20 May 2024 11:47:33 +0200
Kory Maincent <kory.maincent@bootlin.com> wrote:

> From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
> 
> Add missing descriptions for clause 33 options and return values for
> the show-pse and set-pse commands.

Hello,
It seems this patch has not seen any reviews or activity.
Could someone take a look at it?

Regards,
-- 
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com