Add phys properties so Linux can power-on/configure the GTR
transcievers.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

Changes in v2:
- Remove phy-names
- Add an example

 Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
index 426f90a47f35..693b29039a9b 100644
--- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -61,6 +61,10 @@ properties:
   interrupt-map:
     maxItems: 4
 
+  phys:
+    minItems: 1
+    maxItems: 4
+
   power-domains:
     maxItems: 1
 
@@ -110,6 +114,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
     #include <dt-bindings/power/xlnx-zynqmp-power.h>
     soc {
         #address-cells = <2>;
@@ -138,6 +143,7 @@ examples:
                             <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
                             <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
             msi-parent = <&nwl_pcie>;
+            phys = <&psgtr 0 PHY_TYPE_PCIE 0 0>;
             power-domains = <&zynqmp_firmware PD_PCIE>;
             iommus = <&smmu 0x4d0>;
             pcie_intc: legacy-interrupt-controller {
-- 
2.35.1.1320.gc452695387.dirty

On Mon, May 06, 2024 at 12:15:04PM -0400, Sean Anderson wrote:
> Add phys properties so Linux can power-on/configure the GTR
> transcievers.
> 
> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
> ---
> 
> Changes in v2:
> - Remove phy-names
> - Add an example
> 
>  Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
> index 426f90a47f35..693b29039a9b 100644
> --- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
> @@ -61,6 +61,10 @@ properties:
>    interrupt-map:
>      maxItems: 4
>  
> +  phys:
> +    minItems: 1
> +    maxItems: 4

I assume this is 1 phy per lane, but don't make me assume and define it.

Rob

On 5/7/24 16:06, Rob Herring wrote:
> On Mon, May 06, 2024 at 12:15:04PM -0400, Sean Anderson wrote:
>> Add phys properties so Linux can power-on/configure the GTR
>> transcievers.
>> 
>> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
>> ---
>> 
>> Changes in v2:
>> - Remove phy-names
>> - Add an example
>> 
>>  Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 6 ++++++
>>  1 file changed, 6 insertions(+)
>> 
>> diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
>> index 426f90a47f35..693b29039a9b 100644
>> --- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
>> +++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
>> @@ -61,6 +61,10 @@ properties:
>>    interrupt-map:
>>      maxItems: 4
>>  
>> +  phys:
>> +    minItems: 1
>> +    maxItems: 4
> 
> I assume this is 1 phy per lane, but don't make me assume and define it.
> 
> Rob

It's one per lane. I'll add that to the description.

--Sean