This patch series adds support for the Exynos USB 3.1 DRD combo phy, as
found in Exynos 9 SoCs like Google GS101. It supports USB SS, HS and
DisplayPort, but DisplayPort is out of scope for this series.

In terms of UTMI+, this is very similar to the existing Exynos850
support in this driver. The difference is that it supports both UTMI+
(HS) and PIPE3 (SS). Firstly, there are some preparatory patches to simplify
addition, while the bulk of the changes is around the SS part.

This version doesn't change anything around Krzysztof's comments regarding
syscon- vs Exynos-specific PMU APIs, but I wanted to post a version with at
least the simple fixes that are necessary as well applied.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
Changes in v2:
- avoid having nested else/if in the DT binding (Rob)
- add missing bitfield.h include
- Link to v1: https://lore.kernel.org/r/20240423-usb-phy-gs101-v1-0-ebdcb3ac174d@linaro.org

---
André Draszik (7):
      dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
      phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs
      phy: exynos5-usbdrd: support isolating HS and SS ports independently
      phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init()
      phy: exynos5-usbdrd: uniform order of register bit macros
      phy: exynos5-usbdrd: convert to clk_bulk for phy (register) access
      phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)

 .../bindings/phy/samsung,usb3-drd-phy.yaml         |  61 +-
 drivers/phy/samsung/Kconfig                        |   1 -
 drivers/phy/samsung/phy-exynos5-usbdrd.c           | 754 +++++++++++++++++++--
 include/linux/soc/samsung/exynos-regs-pmu.h        |   4 +
 4 files changed, 756 insertions(+), 64 deletions(-)
---
base-commit: d04466706db5e241ee026f17b5f920e50dee26b5
change-id: 20240423-usb-phy-gs101-abf3e172d1c4

Best regards,
-- 
André Draszik <andre.draszik@linaro.org>