On 29/04/2024 14:43, Dmitry Baryshkov wrote:
> The lanes from the USB-C SS port are connected to the combo USB+DP QMP
> PHY rather than the SS port of the USB controller. Move the connection
> endpoint to the QMP PHY out port.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> index d04ceaa73c2b..819f6eadba07 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> @@ -59,7 +59,7 @@ port@1 {
> reg = <1>;
>
> pmic_glink_ss_in: endpoint {
> - remote-endpoint = <&usb_1_dwc3_ss>;
> + remote-endpoint = <&usb_dp_qmpphy_out>;
> };
> };
> };
> @@ -853,10 +853,6 @@ &usb_1_dwc3_hs {
> remote-endpoint = <&pmic_glink_hs_in>;
> };
>
> -&usb_1_dwc3_ss {
> - remote-endpoint = <&pmic_glink_ss_in>;
> -};
> -
> &usb_1_hsphy {
> vdd-supply = <&vreg_l1i_0p88>;
> vdda12-supply = <&vreg_l3i_1p2>;
> @@ -873,6 +869,10 @@ &usb_dp_qmpphy {
> status = "okay";
> };
>
> +&usb_dp_qmpphy_out {
> + remote-endpoint = <&pmic_glink_ss_in>;
> +};
> +
> &xo_board {
> clock-frequency = <76800000>;
> };
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>