drivers/net/dsa/mt7530.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
From: Arınç ÜNAL <arinc.unal@arinc9.com>
When the PHY muxing feature is in use, port 5 won't be defined in the
device tree. Because of this, the type member of the dsa_port structure for
this port will be assigned DSA_PORT_TYPE_UNUSED. The dsa_port_setup()
function calls ds->ops->port_disable() when the port type is
DSA_PORT_TYPE_UNUSED.
The MT7530_P5_DIS bit is unset when PHY muxing is being used.
mt7530_port_disable() which is assigned to ds->ops->port_disable() is
called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS
which breaks network connectivity when PHY muxing is being used.
Therefore, do not set MT7530_P5_DIS when PHY muxing is being used.
Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
Hello.
I've sent this to net-next as the patch it fixes is on the current
development cycle.
---
drivers/net/dsa/mt7530.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2b9f904a98f0..07b6da3ae97c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1220,7 +1220,7 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
return;
- if (port == 5)
+ if (port == 5 && priv->p5_mode == GMAC5)
mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
else if (port == 6)
mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
---
base-commit: 5c4c0edca68a5841a8d53ccd49596fe199c8334c
change-id: 20240427-for-netnext-mt7530-do-not-disable-port5-when-phy-muxing-7ff5fd0995d7
Best regards,
--
Arınç ÜNAL <arinc.unal@arinc9.com>
On Sat, Apr 27, 2024 at 02:24:42PM +0300, Arınç ÜNAL via B4 Relay wrote: > From: Arınç ÜNAL <arinc.unal@arinc9.com> > > When the PHY muxing feature is in use, port 5 won't be defined in the > device tree. Because of this, the type member of the dsa_port structure for > this port will be assigned DSA_PORT_TYPE_UNUSED. The dsa_port_setup() > function calls ds->ops->port_disable() when the port type is > DSA_PORT_TYPE_UNUSED. > > The MT7530_P5_DIS bit is unset when PHY muxing is being used. > mt7530_port_disable() which is assigned to ds->ops->port_disable() is > called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS > which breaks network connectivity when PHY muxing is being used. > > Therefore, do not set MT7530_P5_DIS when PHY muxing is being used. > > Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530") > Reported-by: Daniel Golle <daniel@makrotopia.org> > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> > --- > Hello. > > I've sent this to net-next as the patch it fixes is on the current > development cycle. > --- > drivers/net/dsa/mt7530.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c > index 2b9f904a98f0..07b6da3ae97c 100644 > --- a/drivers/net/dsa/mt7530.c > +++ b/drivers/net/dsa/mt7530.c > @@ -1220,7 +1220,7 @@ mt7530_port_disable(struct dsa_switch *ds, int port) > if (priv->id != ID_MT7530 && priv->id != ID_MT7621) > return; > > - if (port == 5) > + if (port == 5 && priv->p5_mode == GMAC5) > mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS); It might be worth a comment. It is not obvious that priv->p5_mode == GMAC5 means the PHY MUX is being used. mt7530_setup_port5() thinks it is sufficiently obscure that it comments each case. Andrew
On 27.04.2024 16:31, Andrew Lunn wrote: > On Sat, Apr 27, 2024 at 02:24:42PM +0300, Arınç ÜNAL via B4 Relay wrote: >> From: Arınç ÜNAL <arinc.unal@arinc9.com> >> >> When the PHY muxing feature is in use, port 5 won't be defined in the >> device tree. Because of this, the type member of the dsa_port structure for >> this port will be assigned DSA_PORT_TYPE_UNUSED. The dsa_port_setup() >> function calls ds->ops->port_disable() when the port type is >> DSA_PORT_TYPE_UNUSED. >> >> The MT7530_P5_DIS bit is unset when PHY muxing is being used. >> mt7530_port_disable() which is assigned to ds->ops->port_disable() is >> called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS >> which breaks network connectivity when PHY muxing is being used. >> >> Therefore, do not set MT7530_P5_DIS when PHY muxing is being used. >> >> Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530") >> Reported-by: Daniel Golle <daniel@makrotopia.org> >> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> >> --- >> Hello. >> >> I've sent this to net-next as the patch it fixes is on the current >> development cycle. >> --- >> drivers/net/dsa/mt7530.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c >> index 2b9f904a98f0..07b6da3ae97c 100644 >> --- a/drivers/net/dsa/mt7530.c >> +++ b/drivers/net/dsa/mt7530.c >> @@ -1220,7 +1220,7 @@ mt7530_port_disable(struct dsa_switch *ds, int port) >> if (priv->id != ID_MT7530 && priv->id != ID_MT7621) >> return; >> >> - if (port == 5) >> + if (port == 5 && priv->p5_mode == GMAC5) >> mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS); > > > It might be worth a comment. It is not obvious that > priv->p5_mode == GMAC5 means the PHY MUX is being used. > mt7530_setup_port5() thinks it is sufficiently obscure that > it comments each case. priv->p5_mode == GMAC5 means PHY muxing is not being used. That is why MT7530_P5_DIS is set when priv->p5_mode is GMAC5. Anyway, I believe this proves your point. Arınç
© 2016 - 2024 Red Hat, Inc.