Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well
as the Raspberry Pi 4 CM board. The Raspberry Pi 400 board does not
include RJ45 connector LEDs so the 'leds' node is deleted accordingly.

The Ethernet PHY LEDs are numbered in the PHY package/pin list from LED1
through LED4, however their address within the LED registers function
selector is 0-indexed.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
Changes in v3:

- explain LED numbering and add comments
- rename individual LED DT nodes to led@<N>

Changes in v2:

- added function = LED_FUNCTION_LAN
- rebased against latest tree

 .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 22 +++++++++++++++++
 .../arm/boot/dts/broadcom/bcm2711-rpi-400.dts |  1 +
 .../boot/dts/broadcom/bcm2711-rpi-cm4-io.dts  | 24 +++++++++++++++++++
 3 files changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
index cfc8cb5e10ba..353bb50ce542 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -5,6 +5,7 @@
 #include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-peripheral.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -204,6 +205,27 @@ &genet_mdio {
 	phy1: ethernet-phy@1 {
 		/* No PHY interrupt */
 		reg = <0x1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* LED1 */
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* LED2 */
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
index 5a2869a18bd5..ca9be91b4f36 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -30,6 +30,7 @@ &expgpio {
 
 &genet_mdio {
 	clock-frequency = <1950000>;
+	/delete-node/ leds;
 };
 
 &led_pwr {
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
index 7c6a5bdf48aa..6bc77dd48c0d 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "bcm2711-rpi-cm4.dtsi"
 #include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
@@ -110,6 +111,29 @@ rtc@51 {
 	};
 };
 
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LED2 */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* LED3 */
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
 &led_act {
 	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 };
-- 
2.34.1

From: Florian Fainelli <f.fainelli@gmail.com>

On Tue, 23 Apr 2024 12:14:55 -0700, Florian Fainelli <florian.fainelli@broadcom.com> wrote:
> Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well
> as the Raspberry Pi 4 CM board. The Raspberry Pi 400 board does not
> include RJ45 connector LEDs so the 'leds' node is deleted accordingly.
> 
> The Ethernet PHY LEDs are numbered in the PHY package/pin list from LED1
> through LED4, however their address within the LED registers function
> selector is 0-indexed.
> 
> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

Am 23.04.24 um 21:14 schrieb Florian Fainelli:
> Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well
> as the Raspberry Pi 4 CM board. The Raspberry Pi 400 board does not
> include RJ45 connector LEDs so the 'leds' node is deleted accordingly.
>
> The Ethernet PHY LEDs are numbered in the PHY package/pin list from LED1
> through LED4, however their address within the LED registers function
> selector is 0-indexed.
>
> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>