[PATCH v2 00/13] Add PFC support for Renesas RZ/V2H(P) SoC

Prabhakar posted 13 patches 1 week, 6 days ago
.../pinctrl/renesas,rzg2l-pinctrl.yaml        |  40 +-
drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 640 ++++++++++++++++--
2 files changed, 617 insertions(+), 63 deletions(-)
[PATCH v2 00/13] Add PFC support for Renesas RZ/V2H(P) SoC
Posted by Prabhakar 1 week, 6 days ago
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi All,

This patch series aims to add PFC (Pin Function Controller) support for
Renesas RZ/V2H(P) SoC. The PFC block on RZ/V2H(P) is almost similar to
one found on the RZ/G2L family with couple of differences. To able to
re-use the use the existing driver for RZ/V2H(P) SoC function pointers
are introduced based on the SoC changes.


RFC->v2
- Fixed review comments pointed by Rob
- Incorporated changes suggested by Claudiu
- Fixed build error reported for m68K
- Dropped IOLH groups as we will be passing register values
- Fixed configs for dedicated pins
- Added support for slew-rate and bias settings
- Added support for OEN

RFC: https://patchwork.kernel.org/project/linux-renesas-soc/cover/20240326222844.1422948-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

Lad Prabhakar (13):
  dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Remove the check from the
    object
  dt-bindings: pinctrl: renesas: Document RZ/V2H(P) SoC
  pinctrl: renesas: pinctrl-rzg2l: Allow more bits for pin configuration
  pinctrl: renesas: pinctrl-rzg2l: Allow parsing of variable
    configuration for all architectures
  pinctrl: renesas: pinctrl-rzg2l: Validate power registers for SD and
    ETH
  pinctrl: renesas: pinctrl-rzg2l: Add function pointers for
    locking/unlocking the PFC register
  pinctrl: renesas: pinctrl-rzg2l: Add function pointer for writing to
    PMC register
  pinctrl: renesas: pinctrl-rzg2l: Add function pointers for
    reading/writing OEN register
  pinctrl: renesas: pinctrl-rzg2l: Add support to configure the
    slew-rate
  pinctrl: renesas: pinctrl-rzg2l: Add support to set pulling up/down
    the pins
  pinctrl: renesas: pinctrl-rzg2l: Pass pincontrol device pointer to
    pinconf_generic_parse_dt_config()
  pinctrl: renesas: pinctrl-rzg2l: Add support for custom parameters
  pinctrl: renesas: pinctrl-rzg2l: Add support for RZ/V2H SoC

 .../pinctrl/renesas,rzg2l-pinctrl.yaml        |  40 +-
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 640 ++++++++++++++++--
 2 files changed, 617 insertions(+), 63 deletions(-)

-- 
2.34.1