From: Arınç ÜNAL <arinc.unal@arinc9.com>
Reorder the nodes and properties to conform to the Devicetree Sources (DTS)
Coding Style.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi | 92 +++++++++++-----------
.../boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts | 69 ++++++++--------
2 files changed, 80 insertions(+), 81 deletions(-)
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 9c7efb1c44f1..2cfaaabc7a6a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -10,9 +10,9 @@
/ {
memory@0 {
- device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x18000000>;
+ device_type = "memory";
};
nvram@1c080000 {
@@ -20,6 +20,34 @@ nvram@1c080000 {
reg = <0x1c080000 0x00180000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-led {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ button-reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wifi {
+ label = "Wi-Fi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -66,32 +94,29 @@ led-wps {
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
};
};
+};
- gpio-keys {
- compatible = "gpio-keys";
-
- button-led {
- label = "Backlight";
- linux,code = <KEY_BRIGHTNESS_ZERO>;
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- };
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- button-reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ partition@0 {
+ reg = <0x00000000 0x00080000>;
+ label = "boot";
+ read-only;
};
- button-wifi {
- label = "Wi-Fi";
- linux,code = <KEY_RFKILL>;
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ partition@80000 {
+ reg = <0x00080000 0x00180000>;
+ label = "nvram";
};
- button-wps {
- label = "WPS";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ partition@200000 {
+ compatible = "brcm,trx";
+ reg = <0x00200000 0x07e00000>;
+ label = "firmware";
};
};
};
@@ -141,28 +166,3 @@ &usb2 {
&usb3_phy {
status = "okay";
};
-
-&nandcs {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
-
- partition@80000 {
- label = "nvram";
- reg = <0x00080000 0x00180000>;
- };
-
- partition@200000 {
- label = "firmware";
- reg = <0x00200000 0x07e00000>;
- compatible = "brcm,trx";
- };
- };
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
index c78f0c7b137d..a197f447fd97 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -19,13 +19,34 @@ et1macaddr: et1macaddr {
switch {
compatible = "realtek,rtl8365mb";
- /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
realtek,disable-leds;
dsa,member = <1 0>;
+ mdio {
+ compatible = "realtek,smi-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -69,29 +90,21 @@ fixed-link {
};
};
};
+ };
+};
- mdio {
- compatible = "realtek,smi-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
+&gmac0 {
+ status = "disabled";
+};
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
+&gmac1 {
+ nvmem-cells = <&et1macaddr 0>;
+ nvmem-cell-names = "mac-address";
+};
- ethphy3: ethernet-phy@3 {
- reg = <3>;
- };
- };
- };
+&gmac2 {
+ nvmem-cells = <&et1macaddr 1>;
+ nvmem-cell-names = "mac-address";
};
&srab {
@@ -112,17 +125,3 @@ fixed-link {
};
};
};
-
-&gmac0 {
- status = "disabled";
-};
-
-&gmac1 {
- nvmem-cells = <&et1macaddr 0>;
- nvmem-cell-names = "mac-address";
-};
-
-&gmac2 {
- nvmem-cells = <&et1macaddr 1>;
- nvmem-cell-names = "mac-address";
-};
--
2.40.1
From: Florian Fainelli <f.fainelli@gmail.com> On Tue, 23 Apr 2024 12:50:49 +0300, Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@kernel.org> wrote: > From: Arınç ÜNAL <arinc.unal@arinc9.com> > > Reorder the nodes and properties to conform to the Devicetree Sources (DTS) > Coding Style. > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> > --- Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! -- Florian
On Tue, Apr 23, 2024 at 11:51 AM Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@kernel.org> wrote: > From: Arınç ÜNAL <arinc.unal@arinc9.com> > > Reorder the nodes and properties to conform to the Devicetree Sources (DTS) > Coding Style. > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On Tue, Apr 23, 2024 at 11:51 AM Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@kernel.org> wrote: > From: Arınç ÜNAL <arinc.unal@arinc9.com> > > Reorder the nodes and properties to conform to the Devicetree Sources (DTS) > Coding Style. > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
© 2016 - 2026 Red Hat, Inc.