As the registration of the UCSI device is performed from the scheduled
worker, the glue driver isn't notified when the UCSI registration
succeeds. The ucsi_glink driver needs this event to be able to manually
register DisplayPort altmodes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/usb/typec/ucsi/ucsi.c | 3 +++
 drivers/usb/typec/ucsi/ucsi.h | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index cb52e7b0a2c5..ae89c4c8341d 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1755,6 +1755,9 @@ static int ucsi_init(struct ucsi *ucsi)
 	if (UCSI_CCI_CONNECTOR(cci))
 		ucsi_connector_change(ucsi, UCSI_CCI_CONNECTOR(cci));
 
+	if (ucsi->ops->ucsi_registered)
+		ucsi->ops->ucsi_registered(ucsi);
+
 	return 0;
 
 err_unregister:
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index c4d103db9d0f..37ee1b1d8c31 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -62,6 +62,7 @@ struct dentry;
  * @update_altmodes: Squashes duplicate DP altmodes
  * @update_connector: Update connector capabilities before registering
  * @connector_status: Updates connector status, called holding connector lock
+ * @ucsi_registered: notify host driver when the UCSI interface is registered
  *
  * Read and write routines for UCSI interface. @sync_write must wait for the
  * Command Completion Event from the PPM before returning, and @async_write must
@@ -78,6 +79,7 @@ struct ucsi_operations {
 				struct ucsi_altmode *updated);
 	void (*update_connector)(struct ucsi_connector *con);
 	void (*connector_status)(struct ucsi_connector *con);
+	void (*ucsi_registered)(struct ucsi *ucsi);
 };
 
 struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops);

-- 
2.39.2