Sending a 7kB ping packet to the RZ/G2L in Linux v6.9-rc2 causes the
following backtrace:

	WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
	Modules linked in:
	CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W          6.9.0-rc1-00222-gde11614025b1 #3
	Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
	pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
	pc : skb_trim+0x30/0x38
	lr : ravb_rx_csum_gbeth+0x40/0x90
	sp : ffff800080003d40
	x29: ffff800080003d40 x28: 0000000000000400 x27: ffff00000d0f0000
	x26: 0000000000000001 x25: ffff800080003e84 x24: 0000000000000e52
	x23: 0000000000000000 x22: ffff00000d0f0960 x21: 000000000000ffff
	x20: 000000000000f6ff x19: ffff00000cf4cb00 x18: 0000000000000000
	x17: ffff7ffffdd4f000 x16: ffff800080000000 x15: e7e6e5e4e3e2e1e0
	x14: dfdedddcdbdad9d8 x13: 0000131211100f0e x12: 0d0c0b0a09080706
	x11: 0000000013121110 x10: 0000000000000000 x9 : 0000000000000001
	x8 : ffff800080003cf0 x7 : 0000000000000000 x6 : ffff00007faf4590
	x5 : 000000000010000b x4 : a1a8362deecb53ea x3 : 0000000000000080
	x2 : 00000000ffff0000 x1 : 000000000cf4ccfc x0 : ffff00000cf4cb00
	Call trace:
	 skb_trim+0x30/0x38
	 ravb_rx_gbeth+0x56c/0x5cc
	 ravb_poll+0xa0/0x204
	 __napi_poll+0x38/0x17c
	 net_rx_action+0x124/0x268
	 __do_softirq+0x100/0x26c
	 ____do_softirq+0x10/0x1c
	 call_on_irq_stack+0x24/0x4c
	 do_softirq_own_stack+0x1c/0x2c
	 irq_exit_rcu+0xbc/0xd8
	 el1_interrupt+0x38/0x68
	 el1h_64_irq_handler+0x18/0x24
	 el1h_64_irq+0x64/0x68
	 default_idle_call+0x28/0x3c
	 do_idle+0x204/0x25c
	 cpu_startup_entry+0x38/0x3c
	 kernel_init+0x0/0x1d8
	 start_kernel+0x504/0x5f0
	 __primary_switched+0x80/0x88
	---[ end trace 0000000000000000 ]---

This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.

Fixes: c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
---
 drivers/net/ethernet/renesas/ravb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 028ab5c6aaf7..e1e39f65224c 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -843,7 +843,7 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q)
 				priv->rx_1st_skb->protocol =
 					eth_type_trans(priv->rx_1st_skb, ndev);
 				if (ndev->features & NETIF_F_RXCSUM)
-					ravb_rx_csum_gbeth(skb);
+					ravb_rx_csum_gbeth(priv->rx_1st_skb);
 				napi_gro_receive(&priv->napi[q],
 						 priv->rx_1st_skb);
 				rx_packets++;
-- 
2.39.2

On 4/11/24 2:44 PM, Paul Barker wrote:

> Sending a 7kB ping packet to the RZ/G2L in Linux v6.9-rc2 causes the
> following backtrace:
> 
> 	WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
> 	Modules linked in:
> 	CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W          6.9.0-rc1-00222-gde11614025b1 #3
> 	Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
> 	pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> 	pc : skb_trim+0x30/0x38
> 	lr : ravb_rx_csum_gbeth+0x40/0x90
> 	sp : ffff800080003d40
> 	x29: ffff800080003d40 x28: 0000000000000400 x27: ffff00000d0f0000
> 	x26: 0000000000000001 x25: ffff800080003e84 x24: 0000000000000e52
> 	x23: 0000000000000000 x22: ffff00000d0f0960 x21: 000000000000ffff
> 	x20: 000000000000f6ff x19: ffff00000cf4cb00 x18: 0000000000000000
> 	x17: ffff7ffffdd4f000 x16: ffff800080000000 x15: e7e6e5e4e3e2e1e0
> 	x14: dfdedddcdbdad9d8 x13: 0000131211100f0e x12: 0d0c0b0a09080706
> 	x11: 0000000013121110 x10: 0000000000000000 x9 : 0000000000000001
> 	x8 : ffff800080003cf0 x7 : 0000000000000000 x6 : ffff00007faf4590
> 	x5 : 000000000010000b x4 : a1a8362deecb53ea x3 : 0000000000000080
> 	x2 : 00000000ffff0000 x1 : 000000000cf4ccfc x0 : ffff00000cf4cb00
> 	Call trace:
> 	 skb_trim+0x30/0x38
> 	 ravb_rx_gbeth+0x56c/0x5cc
> 	 ravb_poll+0xa0/0x204
> 	 __napi_poll+0x38/0x17c
> 	 net_rx_action+0x124/0x268
> 	 __do_softirq+0x100/0x26c
> 	 ____do_softirq+0x10/0x1c
> 	 call_on_irq_stack+0x24/0x4c
> 	 do_softirq_own_stack+0x1c/0x2c
> 	 irq_exit_rcu+0xbc/0xd8
> 	 el1_interrupt+0x38/0x68
> 	 el1h_64_irq_handler+0x18/0x24
> 	 el1h_64_irq+0x64/0x68
> 	 default_idle_call+0x28/0x3c
> 	 do_idle+0x204/0x25c
> 	 cpu_startup_entry+0x38/0x3c
> 	 kernel_init+0x0/0x1d8
> 	 start_kernel+0x504/0x5f0
> 	 __primary_switched+0x80/0x88
> 	---[ end trace 0000000000000000 ]---
> 
> This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
> wrong skb for a packet which spans multiple descriptors. To fix this,
> use the correct skb.
> 
> Fixes: c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
> Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>

Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>

[...]

MBR, Sergey