Before all supported sensors except for MPU{9150,9250,9255} were not
allowed to use i2c-gate in the bindings which excluded quite a few
supported sensors where this functionality is supported.

Switch the list of sensors to ones where the Linux driver explicitly
disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
the driver is also based on "default: return true" this should scale
better into the future.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
This fixes dt validation error on qcom-msm8974-lge-nexus5-hammerhead
which uses mpu6515

arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dtb: mpu6515@68: i2c-gate: False schema does not allow {'#address-cells': [[1]], '#size-cells': [[0]], 'ak8963@f': {'compatible': ['asahi-kasei,ak8963'], 'reg': [[15]], 'gpios': [[40, 67, 0]], 'vid-supply': [[50]], 'vdd-supply': [[49]]}, 'bmp280@76': {'compatible': ['bosch,bmp280'], 'reg': [[118]], 'vdda-supply': [[50]], 'vddd-supply': [[49]]}}
        from schema $id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml#
---
 .../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 297b8a1a7ffb..587ff2bced2d 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -62,14 +62,15 @@ properties:
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - invensense,mpu9150
-                - invensense,mpu9250
-                - invensense,mpu9255
+      properties:
+        compatible:
+          contains:
+            enum:
+              - invensense,iam20680
+              - invensense,icm20602
+              - invensense,icm20608
+              - invensense,icm20609
+              - invensense,icm20689
     then:
       properties:
         i2c-gate: false

---
base-commit: 8568bb2ccc278f344e6ac44af6ed010a90aa88dc
change-id: 20240408-mpu6050-i2c-gate-4ea473e492f4

Best regards,
-- 
Luca Weiss <luca@z3ntu.xyz>

On 08/04/2024 18:34, Luca Weiss wrote:
> Before all supported sensors except for MPU{9150,9250,9255} were not
> allowed to use i2c-gate in the bindings which excluded quite a few
> supported sensors where this functionality is supported.
> 
> Switch the list of sensors to ones where the Linux driver explicitly
> disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
> the driver is also based on "default: return true" this should scale
> better into the future.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

On Tue, 9 Apr 2024 08:36:08 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:

> On 08/04/2024 18:34, Luca Weiss wrote:
> > Before all supported sensors except for MPU{9150,9250,9255} were not
> > allowed to use i2c-gate in the bindings which excluded quite a few
> > supported sensors where this functionality is supported.
> > 
> > Switch the list of sensors to ones where the Linux driver explicitly
> > disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
> > the driver is also based on "default: return true" this should scale
> > better into the future.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>  
> 
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> Best regards,
> Krzysztof
> 

Applied, thanks