[v8] net: dsa: vsc73xx: Make vsc73xx usable

[PATCH net-next v8 05/16] net: dsa: vsc73xx: add structure descriptions

Posted by Pawel Dembicki 1 year, 8 months ago

This commit adds updates to the documentation describing the structures
used in vsc73xx. This will help prevent kdoc-related issues in the future.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v8,v7,v6:
  - resend only
v5:
  - improved description and stick to 80 characters per line
v4:
  - introduced patch

 drivers/net/dsa/vitesse-vsc73xx.h | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
index fee1378508b5..e7b08599a625 100644
--- a/drivers/net/dsa/vitesse-vsc73xx.h
+++ b/drivers/net/dsa/vitesse-vsc73xx.h
@@ -15,7 +15,16 @@
 #define VSC73XX_MAX_NUM_PORTS	8
 
 /**
- * struct vsc73xx - VSC73xx state container
+ * struct vsc73xx - VSC73xx state container: main data structure
+ * @dev: The device pointer
+ * @reset: The descriptor for the GPIO line tied to the reset pin
+ * @ds: Pointer to the DSA core structure
+ * @gc: Main structure of the GPIO controller
+ * @chipid: Storage for the Chip ID value read from the CHIPID register of the
+ *	sswitch
+ * @addr: MAC address used in flow control frames
+ * @ops: Structure with hardware-dependent operations
+ * @priv: Pointer to the configuration interface structure
  */
 struct vsc73xx {
 	struct device			*dev;
@@ -28,6 +37,11 @@ struct vsc73xx {
 	void				*priv;
 };
 
+/**
+ * struct vsc73xx_ops - VSC73xx methods container
+ * @read: Method for register reading over the hardware-dependent interface
+ * @write: Method for register writing over the hardware-dependent interface
+ */
 struct vsc73xx_ops {
 	int (*read)(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
 		    u32 *val);
-- 
2.34.1

Re: [PATCH net-next v8 05/16] net: dsa: vsc73xx: add structure descriptions

Posted by Vladimir Oltean 1 year, 8 months ago

On Wed, Apr 03, 2024 at 12:37:21PM +0200, Pawel Dembicki wrote:
> This commit adds updates to the documentation describing the structures
> used in vsc73xx. This will help prevent kdoc-related issues in the future.
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

> diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
> index fee1378508b5..e7b08599a625 100644
> --- a/drivers/net/dsa/vitesse-vsc73xx.h
> +++ b/drivers/net/dsa/vitesse-vsc73xx.h
> @@ -15,7 +15,16 @@
>  #define VSC73XX_MAX_NUM_PORTS	8
>  
>  /**
> - * struct vsc73xx - VSC73xx state container
> + * struct vsc73xx - VSC73xx state container: main data structure
> + * @dev: The device pointer
> + * @reset: The descriptor for the GPIO line tied to the reset pin
> + * @ds: Pointer to the DSA core structure
> + * @gc: Main structure of the GPIO controller
> + * @chipid: Storage for the Chip ID value read from the CHIPID register of the
> + *	sswitch

Nitpick (not a request to resend): "switch"

> + * @addr: MAC address used in flow control frames
> + * @ops: Structure with hardware-dependent operations
> + * @priv: Pointer to the configuration interface structure
>   */
>  struct vsc73xx {
>  	struct device			*dev;