As of now, tg3_power_down_prepare always ends with success, but
the error handling code from former tg3_set_power_state call is still here.

This code became unreachable in commit c866b7eac073 ("tg3: Do not use
legacy PCI power management").

Remove (now unreachable) error handling code for simplification and change
tg3_power_down_prepare to a void function as its result is no more checked.

Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
---
v3:
  - Change commit message wording as
    Jakub Kicinski <kuba@kernel.org> requested
v2: https://lore.kernel.org/netdev/a6f3f931-17eb-4e53-9220-f81e7b311a8c@ancud.ru/
  - Change tg3_power_down_prepare() to a void function as
    Michael Chan <michael.chan@broadcom.com> suggested
v1: https://lore.kernel.org/netdev/4e7e11f8-03b5-4289-9475-d3b4e105d40a@ancud.ru/
 drivers/net/ethernet/broadcom/tg3.c | 30 ++++-------------------------
 1 file changed, 4 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 04964bbe08cf..bc36926a57cf 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -4019,7 +4019,7 @@ static int tg3_power_up(struct tg3 *tp)
 
 static int tg3_setup_phy(struct tg3 *, bool);
 
-static int tg3_power_down_prepare(struct tg3 *tp)
+static void tg3_power_down_prepare(struct tg3 *tp)
 {
 	u32 misc_host_ctrl;
 	bool device_should_wake, do_low_power;
@@ -4263,7 +4263,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 
 	tg3_ape_driver_state_change(tp, RESET_KIND_SHUTDOWN);
 
-	return 0;
+	return;
 }
 
 static void tg3_power_down(struct tg3 *tp)
@@ -18090,7 +18090,6 @@ static int tg3_suspend(struct device *device)
 {
 	struct net_device *dev = dev_get_drvdata(device);
 	struct tg3 *tp = netdev_priv(dev);
-	int err = 0;
 
 	rtnl_lock();
 
@@ -18114,32 +18113,11 @@ static int tg3_suspend(struct device *device)
 	tg3_flag_clear(tp, INIT_COMPLETE);
 	tg3_full_unlock(tp);
 
-	err = tg3_power_down_prepare(tp);
-	if (err) {
-		int err2;
-
-		tg3_full_lock(tp, 0);
-
-		tg3_flag_set(tp, INIT_COMPLETE);
-		err2 = tg3_restart_hw(tp, true);
-		if (err2)
-			goto out;
-
-		tg3_timer_start(tp);
-
-		netif_device_attach(dev);
-		tg3_netif_start(tp);
-
-out:
-		tg3_full_unlock(tp);
-
-		if (!err2)
-			tg3_phy_start(tp);
-	}
+	tg3_power_down_prepare(tp);
 
 unlock:
 	rtnl_unlock();
-	return err;
+	return 0;
 }
 
 static int tg3_resume(struct device *device)
-- 
2.34.1

On Mon, Apr 01, 2024 at 10:14:18PM +0300, Nikita Kiryushin wrote:
> As of now, tg3_power_down_prepare always ends with success, but
> the error handling code from former tg3_set_power_state call is still here.
> 
> This code became unreachable in commit c866b7eac073 ("tg3: Do not use
> legacy PCI power management").
> 
> Remove (now unreachable) error handling code for simplification and change
> tg3_power_down_prepare to a void function as its result is no more checked.
> 
> Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
> Reviewed-by: Michael Chan <michael.chan@broadcom.com>

Reviewed-by: Simon Horman <horms@kernel.org>