Add support for AQR114C PHY ID. This PHY advertise 10G speed:
SPEED(0x04): 0x6031
  capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10
                +100 +1000 -10-ts -2-tl +10g
EXTABLE(0x0B): 0x40fc
  capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx
                +100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g
                +2.5g/5g -1000-h

but supports only up to 5G speed (as with AQR111/111B0).
AQR111 init config is used to set max speed 5G.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
---
 drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 71bfddb8f453..d34cdec47636 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -28,6 +28,7 @@
 #define PHY_ID_AQR412	0x03a1b712
 #define PHY_ID_AQR113	0x31c31c40
 #define PHY_ID_AQR113C	0x31c31c12
+#define PHY_ID_AQR114C	0x31c31c22
 #define PHY_ID_AQR813	0x31c31cb2
 
 #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
@@ -962,6 +963,25 @@ static struct phy_driver aqr_driver[] = {
 	.get_stats      = aqr107_get_stats,
 	.link_change_notify = aqr107_link_change_notify,
 },
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR114C),
+	.name           = "Aquantia AQR114C",
+	.probe          = aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init    = aqr111_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr    = aqr_config_intr,
+	.handle_interrupt = aqr_handle_interrupt,
+	.read_status    = aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend        = aqr107_suspend,
+	.resume         = aqr107_resume,
+	.get_sset_count = aqr107_get_sset_count,
+	.get_strings    = aqr107_get_strings,
+	.get_stats      = aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+},
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
 	.name		= "Aquantia AQR813",
@@ -999,6 +1019,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
 	{ }
 };
-- 
2.44.0

On Mon, Apr 01, 2024 at 04:51:06PM +0200, Paweł Owoc wrote:
> Add support for AQR114C PHY ID. This PHY advertise 10G speed:
> SPEED(0x04): 0x6031
>   capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10
>                 +100 +1000 -10-ts -2-tl +10g
> EXTABLE(0x0B): 0x40fc
>   capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx
>                 +100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g
>                 +2.5g/5g -1000-h
> 
> but supports only up to 5G speed (as with AQR111/111B0).
> AQR111 init config is used to set max speed 5G.
> 
> Signed-off-by: Paweł Owoc <frut3k7@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew